* To assess the effect of a long-term treatment by Genotonorm on linear growth in children with short stature receiving steroid therapy * To assess the effect of a long term treatment with Genotonorm on bone mineralisation * To assess the effect of a long term treatment with Genotonorm on body composition
This trial terminated on 10-Jun-2011 due to prolonged issues with drug accountability and data collection discrepancies. The decision to terminate was not based on any safety concerns.
Study Type
INTERVENTIONAL
Allocation
NON_RANDOMIZED
Purpose
TREATMENT
Masking
NONE
Enrollment
30
liquid, daily, until final height Dosage: 0,46 mg/kg/week . The maximum dose should not exceed 50 µg/Kg/day
Pfizer Investigational Site
Paris, France
Pfizer Investigational Site
Paris, France
Change From Baseline in Height Standard Deviation Score According to Chronological Age (SDS/CA) at Year 3
Height was measured using a wall mounted device (example, Harpenden stadiometer). Height SDS/CA was obtained by measuring the height, subtracting chronological age- and gender-appropriate mean height and dividing the result by standard deviation of that mean (as obtained from chronological age- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, Year 3
Change From Baseline in Height Standard Deviation Score According to Chronological Age (SDS/CA) at Final Height
Height was measured using a wall mounted device (example, Harpenden stadiometer). Height SDS/CA was obtained by measuring the height, subtracting chronological age- and gender-appropriate mean height and dividing the result by standard deviation of that mean (as obtained from chronological age- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, when final height was reached (assessed up to Year 11)
Change From Baseline in Weight Standard Deviation Score (SDS) at Final Height
Body weight was measured using a balance scale. Weight SDS was obtained by measuring the weight, subtracting age- and gender-appropriate mean weight and dividing the result by standard deviation of that mean (as obtained from age- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, when final height was reached (assessed up to Year 11)
Puberty Stage at Final Height
Pubertal stage (graded from I to V for breast development and pubic hair development) according to the Tanner's method was collected. A low stage (Stage I) corresponds to a pre-pubertal stage and a high stage (Stage V) to an adult stage.
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Time frame: When final height was reached (assessed up to Year 11)
Bone Age
Bone age was determined by the Greulich and Pyle method using left wrist and hand X-ray.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Lean Body Mass
Lean body mass, a measurement of body composition, was assessed by Dual Energy X-ray Absorptiometry (DEXA) scan.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Annual Percent Change in Lean Body Mass at Year 1, 2 and 3
Lean body mass, a measurement of body composition, was assessed by DEXA scan. Annual percent change: (Lean body mass at current year minus lean body mass at previous year) divided by lean body mass at previous year, multiplied by 100.
Time frame: Baseline, Year 1, 2, 3
Percent Change From Baseline in Lean Body Mass at Year 3
Lean body mass, a measurement of body composition, was assessed by DEXA scan. Percent change: (Lean body mass at Year 3 minus lean body mass at baseline) divided by lean body mass at baseline, multiplied by 100.
Time frame: Baseline, Year 3
Lean Body Mass as Percentage of Total Weight
Lean body mass, a measurement of body composition, was assessed by DEXA scan.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Lean Body Mass Standard Deviation Score According to Chronological Age (SDS/CA)
Lean body mass was assessed by DEXA scan. Lean body mass SDS/CA was obtained by measuring lean body mass, subtracting the chronological age- and gender-appropriate mean lean body mass and dividing the result by standard deviation of that mean (as obtained from chronological age- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Fat Mass
Fat mass, a measurement of body composition, was assessed by DEXA scan.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Annual Percent Change in Fat Mass at Year 1, 2 and 3
Fat mass, a measurement of body composition, was assessed by DEXA scan. Annual percent change: (Fat mass at current year minus fat mass at previous year) divided by fat mass at previous year, multiplied by 100.
Time frame: Baseline, Year 1, 2, 3
Percent Change From Baseline in Fat Mass at Year 3
Fat mass, a measurement of body composition, was assessed by DEXA scan. Percent change: (Fat mass at Year 3 minus fat mass at baseline) divided by fat mass at baseline, multiplied by 100.
Time frame: Baseline, Year 3
Fat Mass as Percentage of Total Weight
Fat mass, a measurement of body composition, was assessed by DEXA scan.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Fat Mass Standard Deviation Score According to Chronological Age (SDS/CA)
Fat mass was assessed by DEXA scan. Fat mass SDS/CA was obtained by measuring fat mass, subtracting chronological age- and gender-appropriate mean fat mass and dividing the result by standard deviation of that mean (as obtained from chronological age- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Apparent Bone Mineral Density of Lumbar Spine (BMAD [LS])
BMAD (LS) was assessed by DEXA scan.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Apparent Bone Mineral Density Standard Deviation Score of Lumbar Spine According to Chronological Age (BMAD [LS] [SDS/CA])
BMAD (LS) was assessed by DEXA scan. BMAD (LS) (SDS/CA) was obtained by measuring the BMAD (LS), subtracting chronological age- and gender-appropriate mean BMAD (LS) and dividing the result by standard deviation of that mean (as obtained from chronological age- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Apparent Bone Mineral Density Standard Deviation Score of Lumber Spine According to Tanner Puberty Stage (BMAD [LS] [SDS/Tanner Puberty Stage])
BMAD (LS) was assessed by DEXA scan. BMAD (LS) (SDS/Tanner Puberty Stage) was obtained by measuring BMAD (LS), subtracting Tanner puberty stage- and gender-appropriate mean BMAD (LS) and dividing the result by standard deviation of that mean (as obtained from Tanner puberty stage- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Bone Mineral Density of Total Body (BMD [TB])
BMD (TB) was assessed by DEXA scan.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Bone Mineral Density of Lumbar Spine (BMD [LS])
BMD (LS) was assessed by DEXA scan.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Bone Mineral Content of Total Body (BMC [TB])
DEXA scan of BMC was used to evaluate potential bone effects of treatment. BMC is an estimate of the amount of mineral (such as calcium) in the bone.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Annual Percent Change in Bone Mineral Content of Total Body (BMC [TB]) at Year 1, 2 and 3
BMC is an estimate of the amount of mineral (such as calcium) in the bone. Annual percent change: (BMC \[TB\] at current year minus BMC \[TB\] at previous year) divided by BMC \[TB\] at previous year, multiplied by 100.
Time frame: Baseline, Year 1, 2, 3
Percent Change From Baseline in Bone Mineral Content of Total Body (BMC [TB]) at Year 3
BMC is an estimate of the amount of mineral (such as calcium) in the bone. Percent change: (BMC \[TB\] at Year 3 minus BMC \[TB\] at baseline) divided by BMC \[TB\] at baseline, multiplied by 100.
Time frame: Baseline, Year 3
Bone Mineral Content Standard Deviation Score of Total Body According to Chronological Age (BMC [TB] [SDS/CA])
BMC (TB) was measured by DEXA scan. BMC (TB) (SDS/CA) was obtained by measuring BMC (TB), subtracting the chronological age- and gender-appropriate mean BMC (TB) and dividing the result by standard deviation of that mean (as obtained from chronological age- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Bone Mineral Content Standard Deviation Score of Total Body According to Tanner Puberty Stage (BMC [TB] [SDS/Tanner Puberty Stage])
BMC (TB) was measured by DEXA scan. BMC (TB) (SDS/Tanner Puberty Stage) was obtained by measuring BMC (TB), subtracting the Tanner puberty stage- and gender-appropriate mean BMC (TB) and dividing the result by standard deviation of that mean (as obtained from Tanner puberty stage- and gender-specific population reference data). SDS indicated how many standard deviations higher (in case of positive SDS) or lower (in case of negative SDS) participant's value was relative to the mean of the reference population.
Time frame: Baseline, Year 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11