Intravascular Near Infrared Spectroscopy (NIRS) Bifurcation - Lipid Core Plaque Shift Study

Overview

This pilot study is going to examine the hypothesis that in coronary arteries, soft lesions that contain lipid cores, but are not calcified or fibrotic and are located in proximity to side branches, are associated with side branch compromise as a result of plaque shift during angioplasty and stenting. Plaque characteristics will be detected by intravascular near infrared spectroscopy (NIRS).

Coronary artery bifurcations (branching areas) are predisposed to atherosclerosis from turbulent flow and increased shear stress. Dilating lesions that involve a branch vessel is associated with the risk of closure of the side branch. Plaque redistribution or 'plaque shift' across the carina of the bifurcation is regarded as the responsible mechanism for the side branch stenosis and occlusion after angioplasty and stenting. Modern techniques of side branch protection require positioning of a second wire into the side branch before starting the treatment of the main branch. Placing an additional wire in the side branch is more laborious and complex than the wiring of the main branch only, is associated with additional use of contrast media and radiation, and may associated with additional risk of complications. Being able to determine which side branches require wiring for protection while treating the main vessel stenosis may make the procedure simpler and safer. Lipid core plaque (LCP) in the coronary arteries is very common in acute coronary syndrome, but can often be found also in patients with stable angina. Lipid core plaque cannot be detected by angiography or intra-vascular ultrasound. Near infrared spectroscopy (NIRS) has the ability to identify chemicals in mixture. LipiScan, a catheter based NIRS coronary imaging system can detect intra-vascular LCP. This catheter has been shown to be able to identify LCP through blood in a prospective autopsy study, and that the LCP detection algorithm developed and validated on ex vivo data is applicable in vivo. The image generated by this system is called 'chemogram'. The catheter has also been tested successfully in a clinical study in the United States and Canada. Based on these studies the FDA approved the use of the LipiScan coronary imaging system. In CUMC, we have started to use this catheter to identify LCP, and have gained experience with its simple use. This study is intended as a pilot study to identify angioplasty related redistribution or shift of lipid core plaque (LCP) lesions that are located at sites of artery bifurcation. We hypothesize that during angioplasty and stenting, soft plaque that contains lipid cores may be prone to shift more than (hard) fibrotic or calcified lesions. This pilot study may help to better characterize lesions likely to shift and to provide imaging-based information like NIRS that will improve the interventional treatment of bifurcation lesions. A total of 20 patients with significant coronary artery disease with a bifurcation lesion suitable for angioplasty and stenting will be studied. The lesions that will be studied contain significant stenosis (≥50% stenosis) located in proximity (less than 2 mm) to a side branch. Prior to angioplasty, the main vessel involved in the bifurcation will be imaged using the LipiScan Coronary Imaging System. Angioplasty and stenting will be performed in the usual conventional way, and then re-imaged with the LipiScan system. Intravascular ultrasound will be done as standard interventional imaging procedure, when directed by the treating interventional cardiologist. Angiographic and Chemographic data will be qualitatively and quantitatively analyzed to assess LCP and plaque shift into the side branch. Subjects that have intravascular ultrasound as part of routine care, will have this data analyzed and compared to the chemogram data. Improved understanding of how plaques and lipid cores redistribute and under what conditions redistribution occurs could assist interventional cardiologists to better plan and perform complex procedures that involve bifurcation plaques. Improved procedural planning and prediction of shift can reduce instances of difficult side branch rescue and reduce occurrence of peri-procedural events, such as myocardial infarction. This may in turn lead to a reduction in overall complexity of treatment procedures, complication, and procedure recovery times. The catheter-based interventional treatment of branching points in blocked heart blood vessels is complex and prone to higher rate of complications. This study is intended to better understand why and under what conditions coronary blockages move during balloon angioplasty and stenting. The movement of coronary artery blockages during the standard treatment of coronary disease often leads to blocking of small artery branches near the treatment site. The blocking of these small branches does not occur at all times, but when it does occur it often results in small myocardial infarctions or residual chest pain. All patients in this study will undergo standard cardiac catheterization and intervention as directed by their treating physician. In this research, the researchers will analyze imaging data that will be collected during the procedure. This includes the angiography (all patients), intravascular ultrasound (in the patients that the operator determines its need for use as part of the procedure), and imaging from the LipiScan catheter (all patients). The LipiScan catheter is approved by the FDA for intravascular detection of fat in the blood vessel, and will be used to detect the fat composition of the blockage. This catheter, detects whether the blockage is composed of fat and is soft, or is fibrous and hard. In this study we are going to try to identify the type of blockages that are associated with branching points, and to learn whether soft and fat containing blockages are associated with shifting or movement of the blockage material into the side branch. The information learned from this study may help interventional cardiologists in the future to better plan their interventional techniques and strategy and to perform safer and more successful procedures. Coronary artery bifurcations (branching areas) are predisposed to atherosclerosis from turbulent flow and increased shear stress. Lesions situated at a bifurcation segment account for up to 16% of the interventional procedures (1). Stenoses at a bifurcation remains one of the most technically challenging lesion subsets to treat by coronary angioplasty and stenting (2- 5). Dilating lesions that involve a branch vessel is associated with the risk of stenosis or complete closure of the side branch. In the past, bifurcation lesions were considered a contraindication to PTCA due to the significantly increased risk of side-branch occlusion. In various series, the rates of side branch stenosis or occlusion post angioplasty and stenting is in the range of 9-67% (6-11) of threatened side branches. Salvage of an occluded side-branch may be difficult, and unsuccessful in around 50% of rescues, especially when the ostium of the side branch contains stenosis prior to occlusion (12, 13). In other cases, the side branch is not occluded, but may be severely narrowed, mainly because of plaque shift. Over the years, with the improved experience, techniques, and technology, it is common practice now to treat bifurcation lesions percutaneously, with high success and acceptable complication rates. Nevertheless bifurcation lesion pose higher technical demand and more use of interventional devices. Using IVUS imaging, plaque redistribution was described during stenting (14, 15). Plaque redistribution or 'plaque shift' across the carina of the bifurcation is regarded as the responsible mechanism that compromises the side branch lumen. Other predictors of side branch occlusion include significant branch-ostial stenosis, main vessel dissection, and acute coronary syndrome including acute MI (16). The later are important situations in which there may be a combination of thrombus on top of a lipid containing plaque. Modern techniques of side branch protection entails positioning of a second wire into the side branch before starting the treatment of the main branch (1,16, 17). The decision to protect the side branch depends on the estimated risk of closure while treating the main branch. Unfortunately, it is impossible to predict whether or not a specific side branch will be compromised. Advancing an additional wire in the side branch is more laborious and complex than the wiring of the main branch, mandating the use of larger caliber guiding catheters, prolongs the overall procedure time, associated with larger volume of contrast media and x-ray radiation, and may be associated with increased risk of complications like coronary dissection, perforation, bleeding and contrast induced nephropathy (1). The ability to identify which side branches need to be wired and protected while working on the main vessel will make the procedure simpler and safer.

Conditions

Interventions

Eligibility

Locations (1)

Outcomes