This study seeks to demonstrate that additional gain in bone mineral density (BMD) can be achieved by switching to MK-5442 from an oral bisphosphonate in participants who have been receiving oral bisphosphonate therapy for at least 3 years.
The study was originally planned for a duration of 2 years and included efficacy analysis of a 15 mg MK-5442 treatment arm. Amendment 1 of the protocol eliminated the 2nd year of the study as well the 15-mg arm. Enrollment into the 15-mg MK-5442 arm was stopped as a result of the amendment and all participants who had been randomly assigned to the MK-5442 15-mg treatment arm were discontinued from the study.
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
TREATMENT
Masking
DOUBLE
Enrollment
526
MK-5442 tablets (randomized to a dose of 5, 7.5, 10 or 15 mg) taken orally, once-daily, for 12 months
Matching placebo to MK-5442 taken orally, once-daily, for 12 months
Alendronate tablets 70 mg, taken orally, once-weekly, for 12 months
Least Squares Mean Percent Change From Baseline To Month 12 in Lumbar Spine Areal Bone Mineral Density (BMD)
Areal bone mineral density (BMD) was measured using dual-energy X-ray absorptiometry (DXA) scanning technology. Scanning is performed with two X-ray beams with different energy levels which are aimed at the participant's bones. When soft tissue absorption is subtracted out, the BMD is determined from the absorption of each beam by bone. BMD = BMC / W, where BMD = bone mineral density in g/cm\^2, BMC = bone mineral content in g/cm, and W = width at the scanned line in cm
Time frame: Baseline and Month 12
Number of Participants With Trough Serum Calcium Level Exceeding Predefined Limits At Least Once
Normal serum calcium level is 8-10 mg/dL (2-2.5 mmol/L) with some interlaboratory variation in the reference range, and hypercalcemia is defined as a serum calcium level greater than 10.5 mg/dL (\>2.5 mmol/L). Based on these references, ≥10.6 mg/dL was predefined in this study as the cut-off for the normal limits of change. Participants with at least a one calcium level value ≥10.6 mg/dL were considered as having a "Tier 1" adverse event (AE). A Tier 1 AE was an AE of special interest identified a priori that could be used for inferential testing for statistical significance for between-group comparisons.
Time frame: Baseline through Month 12
Number of Participants With Trough Albumin-Corrected Calcium Level Exceeding Predefined Limits At Least Once
Albumin-Corrected Calcium = (\[4 - plasma albumin in g/dL\] × 0.8 + serum calcium). ≥10.6 mg/dL was predefined in this study as the cut-off for the normal limits of change. Participants with at least one albumin-corrected calcium level value ≥10.6 mg/dL were considered as having a "Tier 1" AE (an AE of special interest identified a priori that could be used for inferential testing for statistical significance for between-group comparisons).
Time frame: Baseline through Month 12
Number of Participants With Predefined Tier 1 Adverse Events
Osteonecrosis of the jaw (ONJ), kidney stones, and bone neoplasms were predefined Tier-1 AEs in the study (an AE of special interest identified a priori that could be used for inferential testing for statistical significance for between-group comparisons).
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Vitamin D3 (cholecalciferol) administered orally, at a dose of 5600 IU (two tablets, 2800 IU each), once-weekly for 12 months
Participants who qualify (those who have a calcium intake of less than 1200 mg/day) will receive oral supplemental calcium carbonate, at a dose of either 400 mg or 500 mg, once-daily, for 12 months
Placebo to alendronate once-weekly for 12 months
Time frame: Baseline through Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Total Hip Areal BMD
Areal bone mineral density (BMD) was measured using DXA scanning technology. Scanning is performed with two X-ray beams with different energy levels which are aimed at the participant's bones. When soft tissue absorption is subtracted out, the BMD is determined from the absorption of each beam by bone. BMD = BMC / W, where BMD = bone mineral density in g/cm\^2, BMC = bone mineral content in g/cm, and W = width at the scanned line in cm
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Femoral Neck Areal BMD
Areal bone mineral density (BMD) was measured using DXA scanning technology. Scanning is performed with two X-ray beams with different energy levels which are aimed at the participant's bones. When soft tissue absorption is subtracted out, the BMD is determined from the absorption of each beam by bone. BMD = BMC / W, where BMD = bone mineral density in g/cm\^2, BMC = bone mineral content in g/cm, and W = width at the scanned line in cm
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Trochanter Areal BMD
Areal bone mineral density (BMD) was measured using DXA scanning technology. Scanning is performed with two X-ray beams with different energy levels which are aimed at the participant's bones. When soft tissue absorption is subtracted out, the BMD is determined from the absorption of each beam by bone. BMD = BMC / W, where BMD = bone mineral density in g/cm\^2, BMC = bone mineral content in g/cm, and W = width at the scanned line in cm
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Total Body Areal BMD
Areal bone mineral density (BMD) was measured using DXA scanning technology. Scanning is performed with two X-ray beams with different energy levels which are aimed at the participant's bones. When soft tissue absorption is subtracted out, the BMD is determined from the absorption of each beam by bone. BMD = BMC / W, where BMD = bone mineral density in g/cm\^2, BMC = bone mineral content in g/cm, and W = width at the scanned line in cm
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in 1/3 Distal Forearm Areal BMD
Areal bone mineral density (BMD) was measured using DXA scanning technology. Scanning is performed with two X-ray beams with different energy levels which are aimed at the participant's bones. When soft tissue absorption is subtracted out, the BMD is determined from the absorption of each beam by bone. BMD = BMC / W, where BMD = bone mineral density in g/cm\^2, BMC = bone mineral content in g/cm, and W = width at the scanned line in cm
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Trabecular Volumetric BMD (vBMD) of the Lumbar Spine
vBMD was measured using quantitative computed tomography (QCT) in order to assess bone strength. Quantitative computed tomography is a three-dimensional non-projectional technique that quantifies trabecular and cortical BMD in the lumbar spine and hip as a true volumetric mineral density in g/cm\^3.
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Trabecular Volumetric BMD of the Hip
vBMD was measured using QCT in order to assess bone strength. QCT is a three-dimensional non-projectional technique that quantifies trabecular and cortical BMD in the lumbar spine and hip as a true volumetric mineral density in g/cm\^3.
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Cortical Volumetric BMD of the Lumbar Spine
vBMD was measured using QCT in order to assess bone strength. QCT is a three-dimensional non-projectional technique that quantifies trabecular and cortical BMD in the lumbar spine and hip as a true volumetric mineral density in g/cm\^3.
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Cortical Volumetric BMD of the Hip
vBMD was measured using QCT in order to assess bone strength. QCT is a three-dimensional non-projectional technique that quantifies trabecular and cortical BMD in the lumbar spine and hip as a true volumetric mineral density in g/cm\^3.
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Urinary-N Telopeptides of Type 1 Collagen (u-NTx)
Urinary, type I collagen, crosslinked N-telopeptide (uNTx) is a biomarker used to measure the rate of bone turnover found in urine. uNTx was expressed in units of nanomoles (nM) per bone collagen equivalents (BCE) per millimoles of creatinine (Cr) or nM/BCE/mM Cr
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Serum C-Terminal Propeptide of Type 1 Collagen (s-CTx)
C-Terminal Telopeptide Collagen I is used as a serum-marker of bone resorption in the assessment of osteoporosis and in measured in units of nanograms (n)/milliliter (ml).
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Serum N-Terminal Propeptide (s-P1NP)
s-P1NP is a sensitive marker of bone formation rate in the assessment of osteoporosis and is measured in units of ng/ml.
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Serum Bone-Specific Alkaline Phosphatase (s-BSAP)
Bone Specific Alkaline Phosphatase is a biomarker of bone formation and is measured in units of μg/L.
Time frame: Baseline and Month 12
Least Squares Mean Percent Change From Baseline to Month 12 in Serum Osteocalcin
Serum osteocalcin is a biomarker of bone formation and is measured using units of nanograms (ng) / milliliter (mL).
Time frame: Baseline and Month 12