This study is designed as a 3-part trial to evaluate the safety of a novel depot formulation of iloperidone, compare 2 depot dosage forms, and perform dose ranging of 1 chosen form in support of a monthly depot dosing regimen. In Phase A, the study is designed to evaluate the safety of a crystalline iloperidone depot formulation. In Phase B, the pharmacokinetic and safety profile of 2 depot clinical dosage forms will be compared, and 1 form will be selected for assessment in Phase C. Phase C of this study is designed to define the dose-exposure relationship of the selected form and to provide information that will permit a comparison of the risk-benefit ratio of several doses of the study drug to enable optimal dose selection for later studies.
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
TREATMENT
Masking
NONE
Enrollment
81
Iloperidone was formulated as 100 µm crystals for IM depot injection.
Iloperidone was formulated as microparticles for IM depot injection.
Prior to receiving an intramuscular (IM) injection of iloperidone, patients were gradually titrated up with oral iloperidone to stable doses of 12 to 24 mg daily. In Phase A, oral iloperidone dosing lasted for at least 7 days and, in Phases B and C, for at least 10 to 14 days.
Novartis Investigative Site
Glendale, California, United States
Novartis Investigative Site
Philadelphia, Pennsylvania, United States
Maximum Observed Plasma Concentration (Cmax) of Iloperidone Divided by the Average Plasma Concentration (Cav) of Iloperidone (Cmax/Cav) - Phase B
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Time frame: Pre-dose to 26 days post-dose
The Average Plasma Concentration (Cav) of Iloperidone - Phase C
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. Cav was calculated as AUC0-672h/672 h.
Time frame: Pre-dose to 26 days post-dose
Time to Reach the Maximum Plasma Concentration (Tmax) of Iloperidone - Phase B
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Time frame: Pre-dose to 26 days post-dose
Maximum Observed Plasma Concentration (Cmax) of Iloperidone - Phase B
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Time frame: Pre-dose to 26 days post-dose
Area Under the Plasma Concentration-time Curve From 0 to the End of the Dosing Period (AUCtau) of Iloperidone - Phase B
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. The area under the curve was calculated using a linear trapezoidal method. The end of the dosing period was 672 hours (28 days).
Time frame: Pre-dose to 26 days post-dose
Area Under the Plasma Concentration-time Curve From 0 to the Last Measurable Concentration (AUClast) of Iloperidone - Phase B
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. The area under the curve was calculated using a linear trapezoidal method.
Time frame: Pre-dose to 26 days post-dose
The Average Plasma Concentration (Cav) of Iloperidone - Phase B
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. Cav was calculated as AUC0-672h/672 h.
Time frame: Pre-dose to 26 days post-dose
Duration That the Concentration of Iloperidone Was Above 4 ng/mL (Teff) - Phase B
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. The duration that the concentration of iloperidone was above 4 ng/mL was calculated by linear interpolation. PK/pharmacodynamic analysis performed in other studies suggests that iloperidone plasma levels of 4 ng/mL or above provide clinical efficacy.
Time frame: Pre-dose to 26 days post-dose
Time to Reach the Maximum Plasma Concentration (Tmax) of Iloperidone - Phase C
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Time frame: Pre-dose to 26 days post-dose
Maximum Observed Plasma Concentration (Cmax) of Iloperidone - Phase C
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Time frame: Pre-dose to 26 days post-dose
Area Under the Plasma Concentration-time Curve From 0 to the End of the Dosing Period (AUCtau) of Iloperidone - Phase C
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. The area under the curve was calculated using a linear trapezoidal method. The end of the dosing period was 672 hours (28 days).
Time frame: Pre-dose to 26 days post-dose
The Average Plasma Concentration (Cav) of Iloperidone Divided by Dose - Phase C
Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. Cav was calculated as AUC0-672h/672 h.
Time frame: Pre-dose to 26 days post-dose
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.