The combination of the diuretics amiloride hydrochloride (HCl) and hydrochlorothiazide (HCTZ) (GSK3542503) is indicated for the treatment of hypertension, congestive heart failure and hepatic cirrhosis with ascites and edema. This first time in human (FTIH) study is aimed to determine whether the test product GSK3542503 is bioequivalent to the reference (ref) hydrochlorothiazide 50 milligram (mg)/amiloride hydrochlorothiazide 5 mg in healthy adult participants under fasting conditions based on pharmacokinetic (PK) endpoints. This is a phase I, open label, balanced, randomized, single dose, two-way crossover study, enroling approximately 42 healthy participants at a single center. Study participants will be randomized to one of two treatment sequences (A-B or B-A) in accordance with the randomization schedule. A single dose of one of the two treatments A (Test: GSK3542503, a hydrochlorothiazide 50 mg and amiloride hydrochloride 5 mg fixed dose combination) or B (Reference: Moduretic, a hydrochlorothiazide 50 mg and amiloride hydrochloride 5 mg fixed dose combination), will be administered on Day 1, in each treatment period. Each participant will participate in both treatment periods and receive a single dose of each treatment. The treatment periods will be separated by a washout period of at least 7 days and no more than 14 days. The total duration in the study for each participant is expected to be 5 to 7 weeks, from screening to his or her last visit. A maximum of 42 participants will be randomized such that at least 32 evaluable participants complete the study.
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
TREATMENT
Masking
NONE
Enrollment
42
GSK3542503 (HCTZ 50mg/Amiloride HCl 5mg tablets) are cream-colored, circular, flat faced uncoated tablets with beveled edges having break line on one side and "BD" embossed on the other side.
Moduretic (HCTZ 50mg/Amiloride HCl 5mg tablets) tablets are peach-colored, half scored, diamond shaped tablets marked "MSD917".
GSK Investigational Site
Bloemfontein, South Africa
Area Under the Curve (AUC) From Time Zero to the Time of the Last Quantifiable Concentration (AUC [0-t]) of Hydrochlorothiazide and Amiloride Hydrochloride
Blood samples were collected at indicated time points under fasting conditions for pharmacokinetic (PK) analysis of hydrochlorothiazide and amiloride. Bioequivalence of test product and reference product was assessed based on the 90 percent confidence intervals (CIs) for estimates of the geometric mean ratios between the AUC (0-t) of the test and reference products in relation to the conventional bioequivalence range. An analysis of variance was used with sequence, subject (sequence), treatment and period as fixed effects.
Time frame: Pre-dose, 0.33, 0.67, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, 8.0, 10, 12,14, 16 hours post-dose on Day 1, 24 and 36 hours post dose on Day 2 and 48 hours post-dose on Day 3
Maximum Observed Concentration (Cmax) of Hydrochlorothiazide and Amiloride Hydrochloride in Plasma
Blood samples were collected at indicated time points under fasting conditions for pharmacokinetic (PK) analysis of hydrochlorothiazide and amiloride. Bioequivalence of test product and reference product was assessed based on the 90 percent CIs for estimates of the geometric mean ratios between the Cmax of the test and reference products in relation to the conventional bioequivalence range. An analysis of variance was used with sequence, subject (sequence), treatment and period as fixed effects.
Time frame: Pre-dose, 0.33, 0.67, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, 8.0, 10, 12,14, 16 hours post-dose on Day 1, 24 and 36 hours post dose on Day 2 and 48 hours post-dose on Day 3
AUC From Time Zero to Infinity (AUC[0-inf]) of Hydrochlorothiazide and Amiloride Hydrochloride in Plasma
Blood samples were collected at indicated time points under fasting conditions for PK analysis of hydrochlorothiazide and amiloride. Bioequivalence of test product and reference product was assessed based on the 90 percent CIs for estimates of the geometric mean ratios between the AUC (0-inf) of the test and reference products in relation to the conventional bioequivalence range. An analysis of variance was used with sequence, subject (sequence), treatment and period as fixed effects. Only those participants with data available at the specified data points were analyzed (represented by n= X in the category titles).
Time frame: Pre-dose, 0.33, 0.67, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, 8.0, 10, 12,14, 16 hours post-dose on Day 1, 24 and 36 hours post dose on Day 2 and 48 hours post-dose on Day 3
Time of Occurrence of Cmax (Tmax) of Hydrochlorothiazide and Amiloride Hydrochloride in Plasma
Blood samples were collected at indicated time points under fasting conditions for PK analysis of hydrochlorothiazide and amiloride. Median and full range has been presented.
Time frame: Pre-dose, 0.33, 0.67, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, 8.0, 10, 12,14, 16 hours post-dose on Day 1, 24 and 36 hours post dose on Day 2 and 48 hours post-dose on Day 3
Percentage of AUC(0-inf) Obtained by Extrapolation (Percent AUCex) of Hydrochlorothiazide and Amiloride Hydrochloride in Plasma
Blood samples were collected at indicated time points under fasting conditions for PK analysis of hydrochlorothiazide and amiloride. Bioequivalence of test product and reference product was assessed based on the 90 percent CIs for estimates of the geometric mean ratios between percent AUCex of the test and reference products in relation to the conventional bioequivalence range. Only those participants with data available at the specified data points were analyzed (represented by n= X in the category titles).
Time frame: Pre-dose, 0.33, 0.67, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, 8.0, 10, 12,14, 16 hours post-dose on Day 1, 24 and 36 hours post dose on Day 2 and 48 hours post-dose on Day 3
Terminal Phase Half-life (T1/2) of Hydrochlorothiazide and Amiloride Hydrochloride in Plasma
Blood samples were collected at indicated time points under fasting conditions for PK analysis of hydrochlorothiazide and amiloride. Only those participants with data available at the specified data points were analyzed (represented by n= X in the category titles).
Time frame: Pre-dose, 0.33, 0.67, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, 8.0, 10, 12,14, 16 hours post-dose on Day 1, 24 and 36 hours post dose on Day 2 and 48 hours post-dose on Day 3
Number of Participants With Adverse Events (AEs) and Serious AEs (SAEs) During Treatment Period
An AE is any untoward medical occurrence in a clinical investigation participant, temporally associated with the use of a medicinal product, whether or not considered related to the medicinal product. SAE is defined as any untoward medical occurrence that, at any dose results in death, is life threatening requires hospitalization or prolongation of existing hospitalization, results in disability, is a congenital anomaly/ birth effect, other situations and is associated with liver injury or impaired liver function. Only those participants with data available at the specified time points were analyzed
Time frame: Up to 25 days
Alanine Aminotransferase (ALT), Alkaline Phosphatase (Alk.Phosph.) and Aspartate Aminotransferase (AST) Levels at Indicated Time Points
Serum ALT, alk. phosph. and AST levels were assessed as a clinical chemistry laboratory parameter at Day -1 and Day 3 in each treatment period. Only those participants available at the specified time points were analyzed (represented by n=X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
Blood Urea Nitrogen (BUN) Levels at Indicated Time Points
Serum BUN levels were assessed as a clinical chemistry laboratory parameter at Day -1 and Day 3 in each treatment period. Only those participants available at the specified time points were analyzed (represented by n=X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
Calcium, Chloride, Glucose, Magnesium, Potassium and Sodium Levels at Indicated Time Points
Serum calcium, chloride, glucose, magnesium, potassium and sodium levels were assessed as a clinical chemistry laboratory parameter at Day -1 and Day 3 in each treatment period. Only those participants available at the specified time points were analyzed (represented by n=X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
Creatinine, Direct Bilirubin and Total Bilirubin Levels at Indicated Time Points
Serum creatinine, direct bilirubin and total bilirubin levels were assessed as a clinical chemistry laboratory parameter at Day -1 and Day 3 in each treatment period. Only those participants available at the specified time points were analyzed (represented by n=X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
Total Protein Levels at Indicated Time Points
Serum total protein levels were assessed as a clinical chemistry laboratory parameter at Day -1 and Day 3 in each treatment period. Only those participants available at the specified time points were analyzed (represented by n=X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
Systolic Blood Pressure (SBP) and Diastolic Blood Pressure (DBP) Values at Indicated Time Points
Vital sign measurements including SBP and DBP were taken in a supine position after at least 5 minutes of rest at Day -1, Day 1, Day 2 and Day 3 in each treatment period. Only those participants with data available at the specified data points were analyzed (represented by n= X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
Respiratory Rate Values at Indicated Time Points
Vital sign measurements including respiratory rate were taken in a supine position after at least 5 minutes of rest at Day -1, Day 1, Day 2 and Day 3 in each treatment period. Only those participants with data available at the specified data points were analyzed (represented by n= X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
Pulse Rate Values at Indicated Time Points
Vital sign measurements including pulse rate were taken in a supine position after at least 5 minutes of rest at Day -1, Day 1, Day 2 and Day 3 in each treatment period. Only those participants with data available at the specified data points were analyzed (represented by n= X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
Body Temperature Values at Indicated Time Points
Vital sign measurements including body temperature were taken in a supine position after at least 5 minutes of rest at Day -1, Day 1, Day 2 and Day 3 in each treatment period. Only those participants with data available at the specified data points were analyzed (represented by n= X in the category titles).
Time frame: Day -1 and Day 3 of each treatment period
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.