The aim of this cross-over study is to compare the relative bioavailability and pharmacokinetic parameters of both 10 mg conventional tablets and 5 mg dispersible tablets of dolutegravir (DTG) with that of 25 mg or 50 mg conventional DTG tablets. The study will be carried out in 2 parts. Part 1 of the study will be open-label, 2 period designs with a wash out period of at least 7 days between the dosing periods. Subjects will be randomized to receive either single dose of five 10 mg DTG tablets or one 50 mg DTG tablet in a crossover manner in the fasting state. Part 2 of the study will be a 3 period crossover design with a wash out period of at least 7 days between the dosing periods. Subjects will be randomized to receive either single dose of five 5 mg DTG tablets (administered as dispersed with water or directly to mouth) or one 25 mg DTG tablet in a crossover manner in the fasting state. Subjects will have a follow-up visit 7-10 days post last dose of study treatment. Approximately 14 healthy subjects will participate in Part 1 and approximately 24 healthy subjects will participate in Part 2 of the study. The total duration of Part 1 will be approximately 7 to 8 weeks and that of part 2 will be approximately 8 to 9 weeks. TIVICAY® is a trademark of the GlaxoSmithKline group of companies.
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
TREATMENT
Masking
NONE
Enrollment
38
Single dose of five 10 mg DTG tablets will be administered directly to mouth with 240 mL of water in the morning to randomized subjects in fasting state present in Part 1. DTG will be a white, round shaped, biconvex tablet.
Single dose of one 50 mg tablet will be administered directly to mouth with 240 mL of water in the morning to randomized subjects in fasting state present in Part 1. DTG will be a white, round shaped, biconvex tablet.
Single dose of five 5 mg DTG tablets will be administered as dispersed in water or direct to mouth with 240 mL of water in the morning to randomized subjects in fasting state present in Part 2. DTG will be a white, round shaped, biconvex tablet.
Single dose of one 25 mg DTG tablet will be administered directly to mouth with 240 mL of water in the morning to randomized subjects in fasting state present in Part 2. DTG will be a white, round shaped, biconvex tablet.
GSK Investigational Site
Austin, Texas, United States
Area Under the Plasma Concentration-time Curve From Time of Dose Extrapolated to Infinite Time (AUC[0-infinity]) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the pharmacokinetic (PK) profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times. The PK Population was defined as participants in the All Subjects Population for whom a PK sample was obtained and that had evaluable PK assay results.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Area Under the Plasma Concentration-time Curve From Time of Dose to Last Measurable Concentration AUC [0-t] of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times..
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Maximum Observed Concentration (Cmax) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
AUC (0-infinity) of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times..
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
AUC (0-t) of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
Cmax of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
Plasma DTG Lag Time Before Observation of Drug Concentrations (Tlag) for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Time to First Occurrence of Cmax (Tmax) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Terminal Phase Half-life (t1/2) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Terminal-phase Rate Constant (Lambda z) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Percentage of AUC (0-infinity) Obtained by Extrapolation (%AUCex) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Area Under the Concentration-time Curve Over Time Zero (Pre-dose) to 24 Hours After Dose Administration (AUC[0-24]) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Apparent Oral Clearance (CL/F) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times..
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Apparent Volume of Distribution During the Terminal Phase (Vz/F) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Last Observed Quantifiable Concentration (Ct) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Observed Concentration at 24 Hours After Dose Administration (C24) of DTG for Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 1
Plasma DTG Tlag for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
Tmax of DTG for Part 2
Blood sample were collected at the indicated time points after administration of study treatment to investigate the pharmacokinetic profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
t1/2 of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
Lambda Z of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
%AUCex of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
AUC (0-24) of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
DTG CL/F for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
Vz/F of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
Ct of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
C24 of DTG for Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of DTG tablets in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 12, 16, 24, 48, and 72 hours post-dose in Part 2
Number of Participants With Adverse Events (AEs) and Serious Adverse Events (SAEs) for Part 1
AE is any untoward medical occurrence in a participant or clinical investigation participant, temporally associated with the use of a medicinal product, whether or not considered related to the medicinal product. An SAE is any untoward medical occurrence that, at any dose results in death, is life-threatening, requires hospitalization or prolongation of existing hospitalization, results in disability/incapacity, or is a congenital anomaly/birth defect or is medically significant. Data has been presented for AEs and SAEs up-to follow-up (25 days) in Part 1. All Subjects Population was defined as all participants who received at least 1 dose of study medication.
Time frame: Up to 25 days in Part 1
Number of Participants With Adverse Events AEs and Serious Adverse Events SAEs for Part 2
AE is any untoward medical occurrence in a participant or clinical investigation participant, temporally associated with the use of a medicinal product, whether or not considered related to the medicinal product. An SAE is any untoward medical occurrence that, at any dose results in death, is life-threatening, requires hospitalization or prolongation of existing hospitalization, results in disability/incapacity, or is a congenital anomaly/birth defect or is medically significant. Data has been presented for AEs and SAEs up-to follow-up (36 days) in Part 2.
Time frame: Up to 36 days in Part 2
Change From Baseline in Clinical Laboratory Parameters Serum Glucose, Serum Calcium, Serum Potassium, Serum Sodium, Serum Urea for Part 1
Blood samples for the assessment of chemistry parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for serum glucose, serum calcium, serum potassium, serum sodium, serum urea results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Clinical Chemistry Parameters Serum Alanine Amino Transferase (ALT), Serum Alkaline Phosphatase, Serum Aspartate Amino Transferase (AST), Serum Creatine Kinase for Part 1
Blood samples for the assessment of chemistry parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for serum ALT, serum alkaline phosphatase, serum AST, serum creatine kinase results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Clinical Chemistry Parameters Serum Albumin and Serum Protein for Part 1
Blood samples for the assessment of chemistry parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for serum albumin and serum protein results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Clinical Chemistry Parameters Serum Bilirubin, Serum Creatinine and Serum Direct Bilirubin for Part 1
Blood samples for the assessment of chemistry parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for serum bilirubin, serum creatinine and serum direct bilirubin results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Clinical Chemistry Parameters Serum Glucose, Serum Calcium, Serum Potassium, Serum Sodium, Serum Urea for Part 2
Blood samples for the assessment of chemistry parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for serum glucose, serum calcium, serum potassium, serum sodium, serum urea results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Clinical Chemistry Parameters Serum ALT, Serum Alkaline Phosphate, Serum AST, Serum Creatine Kinase for Part 2
Blood samples for the assessment of chemistry parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for serum ALT, serum alkaline phosphatase, serum AST, serum creatine kinase results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Clinical Chemistry Parameters Serum Albumin and Serum Protein for Part 2
Blood samples for the assessment of chemistry parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for serum albumin and serum protein results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Clinical Chemistry Parameters Serum Bilirubin, Serum Creatine and Serum Direct Bilirubin for Part 2
Blood samples for the assessment of chemistry parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for serum bilirubin, serum creatine and serum direct bilirubin results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Hematology Parameter Blood Erythrocyte Mean Corpuscular Hemoglobin (MCH) for Part 1
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood erythrocyte MCH results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Hematology Parameter Blood Erythrocyte Mean Corpuscular Volume (MCV) for Part 1
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood erythrocyte MCV results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x,x in the category titles).
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Hematology Parameters Blood Basophils, Blood Eosinophils, Blood Leukocytes, Blood Lymphocytes, Blood Monocytes, Blood Neutrophils, Blood Platelets for Part 1
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood basophils, blood eosinophils, blood leukocytes, blood lymphocytes, blood monocytes, blood neutrophils, blood platelets results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x,x in the category titles)
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Hematology Parameter Blood Hemoglobin for Part 1
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood hemoglobin results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x,x in the category titles)
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Hematology Parameter Blood Hematocrit for Part 1
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood hematocrit results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x,x in the category titles).
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Hematology Parameter Blood Erythrocytes for Part 1
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 25) in Part 1. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood erythrocyte results for Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x,x in the category titles).
Time frame: Baseline and up to 25 days in Part 1
Change From Baseline in Hematology Parameter Blood Erythrocyte MCH for Part 2
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood erythrocyte MCH results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x,x,x in the category titles).
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Hematology Parameter Blood Erythrocyte MCV for Part 2
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood erythrocyte MCV results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x,x,x in the category titles).
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Hematology Parameters Blood Basophils, Blood Eosinophils,, Blood Leukocytes, Blood Lymphocytes, Blood Monocytes, Blood Neutrophils, Blood Platelets for Part 2
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood basophils, blood eosinophils, blood leukocytes, blood lymphocytes, blood monocytes, blood neutrophils, blood platelets results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x,x,x in the category titles)
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Hematology Parameter Blood Hemoglobin for Part 2
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood hemoglobin results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x,x,x in the category titles)
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Hematology Parameter Blood Hematocrit for Part 2
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood hematocrit results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x,x,x in the category titles)
Time frame: Baseline and up to 36 days in Part 2
Change From Baseline in Hematology Parameter Blood Erythrocytes for Part 2
Blood samples for the assessment of hematology parameters were collected at Baseline and up-to follow-up (Day 36) in Part 2. Baseline was defined as pre-dose assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Data has been presented for blood erythrocytes results for Part 2. Only those participants with data available at the specified time were analyzed (represented by n=x,x,x in the category titles).
Time frame: Baseline and up to 36 days in Part 2
Number of Participants With Abnormal Values on Urinalysis by Dipstick Method for Part 1
Urinalysis parameters assessed were urine ketones, urine glucose, urine occult blood and urine protein. In this dipstick test, the level of ketones, glucose, occult blood and protein in urine samples was recorded as negative trace, 1+, 2+, and 3+ (the plus sign increases with a higher level of glucose, ketones, or proteins in the urine: 1+=slightly positive, 2+=positive, 3+=high positive). Urine samples were collected for the measurement of urinalysis parameters by dipstick method up-to follow-up (Day 25) in Part 1. Only categories with significant values have been presented.
Time frame: Up to 25 days in Part 1
Urine Potential of Hydrogen (pH) Analysis by Dipstick Method for Part 1
Urinary pH measurement is a routine part of urinalysis. Urine pH is an acid-base measurement. pH is measured on a numeric scale ranging from 0 to 14; values on the scale refer to the degree of alkalinity or acidity. A pH of 7 is neutral. A pH less than 7 is acidic, and a pH greater than 7 is basic. Normal urine has a slightly acid pH (5.0 - 6.0). Urine samples were collected for the measurement of urine pH by dipstick method up-to follow-up (Day 25) in Part 1. Only categories with significant values have been presented. Only those participants with data available at the specified time were analyzed (represented by n=x,x in the category titles).
Time frame: Up to 25 days in Part 1
Urine Specific Gravity Analysis by Dipstick Method for Part 1
Urinary specific gravity measurement is a routine part of urinalysis. Urine specific gravity is a measure of the concentration of solutes in the urine and provides information on the kidney's ability to concentrate urine. The concentration of the excreted molecules determines the urine's specific gravity. Urine samples were collected for the measurement of urine specific gravity by dipstick method up-to follow-up (Day 25) in Part 1. Only categories with significant values have been presented. Only those participants with data available at the specified time were analyzed (represented by n=x,x in the category titles).
Time frame: Up to 25 days in Part 1
Number of Participants With Abnormal Values on Urinalysis by Dipstick Method for Part 2
Urinalysis parameters assessed were urine ketones, urine glucose, urine occult blood and urine protein. In this dipstick test, the level of ketones, glucose, occult blood and protein in urine samples was recorded as negative trace, 1+, 2+, and 3+ (the plus sign increases with a higher level of glucose, ketones, or proteins in the urine: 1+=slightly positive, 2+=positive, 3+=high positive). Urine samples were collected for the measurement of urinalysis parameters by dipstick method up-to follow-up (Day 36) in Part 2. Only categories with significant values have been presented.
Time frame: Up to 36 days in Part 2
Urine pH Analysis by Dipstick Method for Part 2
Urinary pH measurement is a routine part of urinalysis. Urine pH is an acid-base measurement. pH is measured on a numeric scale ranging from 0 to 14; values on the scale refer to the degree of alkalinity or acidity. A pH of 7 is neutral. A pH less than 7 is acidic, and a pH greater than 7 is basic. Normal urine has a slightly acid pH (5.0 - 6.0). Urine samples were collected for the measurement of urine pH by dipstick method up-to follow-up (Day 36) in Part 2. Only categories with significant values have been presented. Only those participants with data available at the specified time were analyzed (represented by n=x,x,x in the category titles).
Time frame: Up to 36 days in Part 2
Urine Specific Gravity Analysis by Dipstick Method for Part 2
Urinary specific gravity measurement is a routine part of urinalysis. Urine specific gravity is a measure of the concentration of solutes in the urine and provides information on the kidney's ability to concentrate urine. The concentration of the excreted molecules determines the urine's specific gravity. Urine samples were collected for the measurement of urine specific gravity by dipstick method up-to follow-up (Day 36) in Part 2. Only categories with significant values have been presented. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Up to 36 days in Part 2
Number of Participants With Chemistry Toxicities of Grade 2 as Defined by Division of Acquired Immunodeficiency Syndrome (DAIDS) for Part 1
The DAIDS toxicity table provides descriptive terminology for grading the severity of adult adverse events. Laboratory grades also provide ranges for each parameter. Grade 1: mild, Grade 2: moderate, Grade 3: severe, Grade 4: potentially life threatening. low LDL (low-density lipid); HDL (high-density lipid). Data has been presented for clinical chemistry laboratory result parameter (serum sodium) with toxicity of Grade 2 for Part 1.
Time frame: Up to 25 days in Part 1
Number of Participants With Urinalysis Toxicities of Grade 2 as Defined by DAIDS for Part 1
The DAIDS toxicity table provides descriptive terminology for grading the severity of adult adverse events. Laboratory grades also provide ranges for each parameter. Grade 1: mild, Grade 2: moderate, Grade 3: severe, Grade 4: potentially life threatening, low LDL and HDL Data has been presented for urinalysis laboratory result parameter (urine protein by dipstick analysis) with toxicity of Grade 2 for Part 1.
Time frame: Up to 25 days in Part 1