Normal Echocardiographic Parameters of Indian Population and Comparison With the ASE Reference Range

Overview

Echocardiography forms one of the most used modality in the evaluation of cardiac anatomy and functions in both patients with cardiac symptoms and in healthy individuals for occupational and research purpose. The interpretation of any medical investigation including echocardiographic report is based on its comparison with the normal range for that parameter, which is known to vary depending on the age, sex, body surface area (BSA), ethnicity and race. Since most of the medical/surgical treatment decisions are made based on the echocardiographic reports, the interpretation of results should be accurate. Even though there are many studies defining reference ranges of echocardiographic parameters, most of them were based on studies conducted in Western and European population, who shows considerable difference in their anthropometric measurements from the Indian population. Hence for the accurate diagnosis of any cardiac abnormalities, the reference values should have been derived from studies conducted in population of that particular race and ethnicity who are free of risk factors for the cardiac disease. Hence the investigator planned to conduct a study to determine the normal Echocardiographic parameters and compare it with the reference range of established by American society of echocardiography (ASE).

Aim To determine the mean and standard deviation for Echocardiographic 2 dimensional, Doppler and strain parameters in Indian population and compare it with the reference range established by ASE Materials and Methods After getting ethical clearance and informed patient consent, the study will be performed in 150 individuals who visit pre-anaesthetic check up (PAC) clinic for minor surgery which includes plastic, rhino-otolaryngeal, ophthalmologic, orthopaedic, abdominal, urological, gynaecological surgeries, who are free of cardiac disease or any known risk factors for the cardiac disease like chronic alcoholism, chronic smoking, metabolic syndrome, morbid obesity. The duration of study will be from October 2017 to June 2018 or till 150 individual studied. Echocardiographic Study For all the individual electrocardiogram (ECG) integrated TTE will be done using general electric (GE) Echocardiographic machine using the cardiac probe of frequency 5 Hz in supine or left lateral position in a comfortable environment. All images will be recorded as per the ASE recommendations and the images will be analysed by echo cardiographer accredited by the national board of echocardiography. Three consecutive cardiac cycles were measured and average of the three will be taken for analysis. Image acquisition By placing the Transducer in the left third or fourth intercostal space adjacent to the sternum parasternal short axis (PSAX) view is obtained, by tilting the probe superiorly and inferiorly, the true short axis view of the LV where both the papillary muscle are seen. Parasternal long axis (PLAX) view is formed by rotating the probe perpendicular from the true PSAX view. By applying M mode across the tip of the MV in PLAX view the end diastolic, end systolic dimensions of LV, posterior wall and inter-ventricular septum thickness, relative wall thickness (RWT) and LV internal dimension will be measured from leading edge to leading edge.1 From the same image FS, LVEF by Teicholtz method, LV mass by linear cube method will be calculated. LV EF (Teicholtz)32 : LVEDV = 7/(2.4+LVEDD) X LVEDD3 LVESV = 7/(2.4+LVESD) X LVESD3 LV FS32 = (LVEDD-LVESD/LVEDD) x 100 LV mass in grams = 0.8x{1.04x\[(IVSd+PWd+LVEDD)3 - LVIDD3\]} +0.6.1 RWT = (2 X PW thickness)/ LVEDD.33 By moving the transducer cranially and medially towards sternum, and by placing M mode across the aortic sinus, perpendicular to the long axis of the aorta, LA AP diameter will be measured from leading edge to leading edge at the end of systole. From the same 2D image the aortic annulus, sino-tubular junction (STJ), aortic sinus and ascending aorta diameter will be measured from leading edge to leading edge.1 By tilting the probe from the PLAX view towards the sternum, the distal RVOT will be in view and diameter of which is measured from the leading edge to the leading edge. Proximal RVOT diameter is measured from the leading edge to the leading edge at the diastole in PSAX view in which the right ventricular (RV) inflow and outflow is visible,31 in the same view the diameter of the pulmonary valve (PV) annulus will be measured. On palpation, the apical impulse will be identified and by placing the transducer in that point with the probe pointing toward the right shoulder, apical 4 chamber (A4C) view is obtained. The image will be optimized to get the maximum length of the LV to avoid foreshortening by identifying the pinching apex. LV end systolic volume (LVESV) and EDV and EF will be measured by Simpson's method. And by applying pulse wave Doppler with the sample volume at the tip of the mitral leaflet, mitral valve E, A velocity and deceleration time and A wave duration are calculated. In the same image by applying Tissue Doppler (TDI) over mitral valve lateral and septal annulus e', a', S', TEI index, isovolumic relaxation time (IVRT) and isovolumic contraction time (IVCT) are calculated. TEI index is calculated using the formula (IVRT+IVCT)/ET, where ET is the ejection time. By applying M mode across the lateral annulus of the MV, mitral annular plane systolic excursion (MAPSE) is measured in cms. All the Doppler measurement will be done with the acceptable alignment between the cursor angle and movement of the tissue or blood flow (\<20 degree). Strain will be measured for both the lateral and septal wall of the LV in the same image. By tilting the probe towards sternum and bringing the TV in the focus, the apical RV focussed view is formed. TV annulus, RV basal and mid diameter and the RV length are measured from the leading edge to the leading edge. And by applying TDI at the lateral annulus of TV e', a', s', TEI index are measured. On applying M mode across the lateral annulus, tricuspid annular plane systolic excursion (TAPSE) is measured. FAC which is measured by {RV diastolic area (DA) - RV systolic area (SA)}/ RV DA, and RV lateral wall strain are measured. Subcostal view is obtained by placing the probe in the xiphi-sternum directing towards the left shoulder. Patient can be asked to flex the legs to make the abdominal wall relax for the placement of the probe. The RV lateral wall thickness and TV annulus diameter is measured in the subcostal 4 chamber view. And on placing the probe vertically with the pointer directed cephalad the inferior vena cava (IVC) is seen in the long axis which can be used for measuring the IVC diameter at the end expiration. All measurements were divided by BSA for the indexed measurements. The peak of R wave and the beginning of the T wave in the ECG are used to identify the end of diastole and end of systole respectively while performing measurement.