Minnelide, a water-soluble disodium salt variant of triptolide, is a diterpenoid heat shock protein 70 (HSP70) inhibitor. Studies using AML cell lines, primary patient samples, and mouse transplant models demonstrate that Minnelide has potent cell killing effects. Minnelide has already been developed for human use and given to patients in a phase I trial for gastrointestinal (GI) cancers. Given the clinical safety profile and preliminary activity described in human GI cancers, the low-nanomolar anti-leukemic potency of triptolide in vitro, and that minnelide doses predicted to be significantly below the maximum tolerated dose (MTD) in human GI cancers decreased leukemia burden in animal models, the investigators propose a phase I trial in acute myeloid leukemia (AML).
This is a Phase 1, open label, dose-escalation, safety, pharmacokinetic, and pharmacodynamic pilot study of minnelide given to adult patients with relapsed or refractory AML. The patient population will consist of adults previously diagnosed with relapsed/refractory AML for whom standard curative or life-prolonging treatment is unavailable or is no longer effective. Patients who are on hydroxyurea may be included in the study and may continue on hydroxyurea while participating in this study. Once enrolled into the study, patients will be administered Minnelide via a 30-minute IV infusion. Each 28-day treatment cycle is composed of 5 consecutive daily doses of Minnelide followed by a 2-day rest period, repeating for 21 days, followed by a 7-day rest period. Minnelide therapy may be administered for up to at least 12 cycles provided that the patient tolerates treatment and there is evidence of clinical benefit. If patients are still receiving clinical benefit, treatment may continue beyond 12 cycles, depending on drug availability and drug manufacturer (Minneamrita®) agreement. Study drug may be discontinued early if a patient experiences study drug related toxicities. Patients may discontinue therapy at any time. Patients will attend an End-of-Study visit 30 (+/- 10) days after receiving their last dose of study drug. To determine the MTD of minnelide, an approach using traditional "3+3" escalation rules will be used. Dose-limiting toxicity (DLT) will be defined as events that are considered by the investigator to be related to therapy with minnelide. Although DLTs may occur at any point during treatment, only DLTs occurring during Cycle 1 of treatment will influence decisions regarding dose escalation. The initial minnelide dose will be 0.53 mg/m2 per dose; (3 dose levels will be explored; 0.53 mg/m2, 0.67 mg/m2, and 0.80 mg/m2). If more than 1 DLT occurs at Dose Level 1, then the next dose to be evaluated (Dose Level -1) will be 0.40 mg/m2. If more than 1 DLT occurs at Dose Level -1, the investigators will consider stopping the study. More conservative dose escalation, evaluation of intermediate doses, and expansion of an existing dose level are all permissible at the discretion of the investigator, if such measures are needed for patient safety or for a better understanding of the dose-related toxicity, exposure, or pharmacodynamics of minnelide. Toxicity will be evaluated according to National Cancer Institute Common Terminology Criteria for Adverse Events (NCI CTCAE), Version 4.0. Adverse events (AEs) will be assessed, and laboratory values, vital signs, and electrocardiograms (ECGs) will be obtained to evaluate the safety and tolerability of minnelide. Serial blood samples for determination of the plasma concentration of minnelide will be obtained during Cycle 1 at pre-specified time points. Assessment of disease response will follow the criteria outlined in the recommendations of the International Working Group (IWG) for diagnosis, standardization of response criteria, treatment outcomes, and reporting standards for therapeutic trials in myeloid malignancies \[21, 22\]. Circulating leukemic blasts will be assayed for pharmacodynamic marker levels before and at pre-defined time points after minnelide administration to characterize the extent and duration of the biological effects of minnelide in leukemic cells. Exploratory analyses of potential relationships between measures of plasma drug exposure and pharmacodynamic effects of minnelide may be performed as permitted by the data.
Study Type
INTERVENTIONAL
Allocation
NON_RANDOMIZED
Purpose
TREATMENT
Masking
NONE
Minnelide therapy may be administered for up to 12 cycles of 28 days are planned. If patients are receiving clinical benefit, treatment can continue beyond 12 cycles.
Safety Profile of Minnelide: Rate of Toxicity in Study Participants
Rate of toxicity in study participants including serious adverse events (SAEs), grade 3 or higher adverse events (AEs), and dose limiting toxicities (DLTs) by treatment dose level cohorts. Toxicity will be assessed in terms of nature, grade and attribution to treatment, using the National Cancer Institute Common Terminology Criteria for Adverse Events (NCI CTCAE), Version 4.03. * Evaluable for Safety: Study participants who receive at least one dose of Minnelide therapy. * Evaluable for DLT: Study participants who either experience a DLT during Cycle 1 or receive at least 12 (80%) of scheduled doses of minnelide during Cycle 1 without a DLT. Missed doses will not be made up. Eligible patients who discontinue minnelide therapy, miss more than 3 doses of Minnelide, or require a dose reduction in minnelide during Cycle 1 for reasons other than DLT will not be evaluable for DLT and will be replaced.
Time frame: From first dose of therapy to within 30 days after final dose; assessed up to 13 months
Maximum Tolerate Dose (MTD) of Minnelide
The MTD will be defined as highest dose level below or at the maximally administered dose for which ≤ 1 out of 6 patients experiences a dose-limiting toxicity (DLT). To determine the MTD of Minnelide, an approach using traditional "3+3" escalation rules will be used. Dose-limiting toxicity (DLT) will be defined as events that are considered by the investigator to be related to therapy with minnelide. Although DLTs may occur at any point during treatment, only DLTs occurring during Cycle 1 of treatment will influence decisions regarding dose escalation.
Time frame: During Cycle 1, up to 28 days
Recommended Phase 2 Dose (RP2D) of Minnelide
Following the proposed dose escalation and expansion cohort, the RP2D of Minnelide will be established as the highest dose level tested for which no more than 2 out of 12 patients experiences a dose-limiting toxicity.
Time frame: During Cycle 1, up to 28 days
Efficacy of Minnelide Therapy: Overall Response Rate (ORR)
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Efficacy will be determined by overall response rate (ORR) to Minnelide therapy in study participants. Overall response rate includes rate of study participants experiencing complete response (CR), CR with incomplete bone marrow recovery (CRi); or Partial response (PR) to Minnelide therapy. Best response will be determined using serial blood and bone marrow sampling throughout the course of treatment. Responses will be documented according to revised/modified International Working Group (IWG) Response Criteria (Cheson et al. 2003 for AML and update 2010). Study participants who receive at least 1 cycle of protocol therapy, have measurable disease at baseline, and have at least one post-baseline disease assessment are evaluable for efficacy.
Time frame: Disease assessment at Baseline, Cycle 2 Day 1, afterwards on Day 1 of each/every other 28-day cycle at investigator discretion, End of Study; Assessed up to 13 months
Pharmacokinetics (PK): Area Under the Curve (AUC) of Plasma Concentration of Minnelide
The area under the plasma concentration-time curve from time 0 to 24 hours post-dose (AUC24hr) will be assessed. Serial blood samples for the determination of plasma concentrations of Minnelide will be collected at pre-specified time points during Cycle 1 to characterize the PK of Minnelide. Plasma for measuring Minnelide concentrations will be collected on day 1 and 8 pre-dose, at the end of infusion (EOI), 0.5, 2, 4, 6, 24 hours post-dose. Descriptive statistics will be used to summarize Cmax for each dose level and all patients. Study participants who receive at least 1 dose of minnelide therapy and undergo at least 5 PK blood draws with concentration-time data to reliably estimate PK parameters are evaluable for PK.
Time frame: Cycle 1 Days 1, 2, 8 and 9
Pharmacokinetics (PK): Maximum (Peak) Plasma Concentration (Cmax) of Minnelide
Cmax is the maximum (or peak) plasma concentration that a drug achieves in a specified compartment or test area of the body after the drug has been administrated and before the administration of a second dose. Serial blood samples for the determination of plasma concentrations of Minnelide will be collected at pre-specified time points during Cycle 1 to characterize the PK of Minnelide. Plasma for measuring Minnelide concentrations will be collected on day 1 and 8 pre-dose, at the end of infusion (EOI), 0.5, 2, 4, 6, 24 hours post-dose. Descriptive statistics will be used to summarize Cmax for each dose level and all patients. Study participants who receive at least 1 dose of minnelide therapy and undergo at least 5 PK blood draws with concentration-time data to reliably estimate PK parameters are evaluable for PK.
Time frame: Cycle 1 Days 1, 2, 8 and 9
Pharmacokinetics (PK): Time to maximum plasma concentration (Tmax) of Minnelide
Tmax is the time it takes a drug or other substance to reach the maximum concentration (Cmax). Serial blood samples for the determination of plasma concentrations of Minnelide will be collected at pre-specified time points during Cycle 1 to characterize the PK of Minnelide. Plasma for measuring Minnelide concentrations will be collected on day 1 and 8 pre-dose, at the end of infusion (EOI), 0.5, 2, 4, 6, 24 hours post-dose. Descriptive statistics will be used to summarize Tmax for each dose level and all patients. Study participants who receive at least 1 dose of minnelide therapy and undergo at least 5 PK blood draws with concentration-time data to reliably estimate PK parameters are evaluable for PK.
Time frame: Cycle 1 Days 1, 2, 8 and 9
Pharmacokinetics (PK): Terminal Phase Half Life (t1/2) of Plasma Concentration of Minnelide
Terminal phase half-life (t1/2) will be assessed. Half-life (t1/2) is the amount of time it takes for the drug concentration in the plasma to decline by half. Serial blood samples for the determination of plasma concentrations of Minnelide will be collected at pre-specified time points during Cycle 1 to characterize the PK of Minnelide. Plasma for measuring Minnelide concentrations will be collected on day 1 and 8 pre-dose, at the end of infusion (EOI), 0.5, 2, 4, 6, 24 hours post-dose. Descriptive statistics will be used to summarize terminal phase half life for each dose level and all patients. Study participants who receive at least 1 dose of minnelide therapy and undergo at least 5 PK blood draws with concentration-time data to reliably estimate PK parameters are evaluable for PK.
Time frame: Cycle 1 Days 1, 2, 8 and 9
Pharmacokinetics (PK): total body clearance (CL/F)
Apparent total clearance of the drug from plasma, the rate at which a drug is removed from the body, considered as a single unit, the sum of renal clearance + hepatic clearance + other clearance, expressed as volume per unit time. Serial blood samples for the determination of plasma concentrations of Minnelide will be collected at pre-specified time points during Cycle 1 to characterize the PK of Minnelide. Plasma for measuring Minnelide concentrations will be collected on day 1 and 8 pre-dose, at the end of infusion (EOI), 0.5, 2, 4, 6, 24 hours post-dose. Descriptive statistics will be used to summarize terminal phase half life for each dose level and all patients. Study participants who receive at least 1 dose of minnelide therapy and undergo at least 5 PK blood draws with concentration-time data to reliably estimate PK parameters are evaluable for PK.
Time frame: Cycle 1 Days 1, 2, 8 and 9
Pharmacokinetics (PK): Apparent Volume of Distribution (Vd/F)
The apparent volume of distribution is the theoretical volume of fluid into which the total drug administered would have to be diluted to produce the concentration in plasma. Serial blood samples for the determination of plasma concentrations of Minnelide will be collected at pre-specified time points during Cycle 1 to characterize the PK of Minnelide. Plasma for measuring Minnelide concentrations will be collected on day 1 and 8 pre-dose, at the end of infusion (EOI), 0.5, 2, 4, 6, 24 hours post-dose. Descriptive statistics will be used to summarize terminal phase half life for each dose level and all patients. Study participants who receive at least 1 dose of minnelide therapy and undergo at least 5 PK blood draws with concentration-time data to reliably estimate PK parameters are evaluable for PK.
Time frame: Cycle 1 Days 1, 2, 8 and 9
Pharmacodynamics (PD): Expression and Activity Levels of HSP70, PI3K/Akt/mTOR, MAPK/ERK pathway and other relevant markers
Pharmacodynamic (PD) measurements will be obtained from serial blood and bone marrow sampling at specified time points to describe the PD effects of Minnelide. PD paramaters include HSP70 expression and activity, mitochondrial cytochrome c, caspase-3 activation, PI3K/Akt/mTOR and MAPK/ERK pathway activity, and other relevant markers. Study participants who receive at least 1 dose of Minnelide and undergo at least 2 PD blood and bone marrow samples are evaluable. Descriptive statistics will be used to summarize PD parameters for each dose level and all patients. * Blood - PD Sampling at pre-dose Cycle 1 Day 1, Day 2 and Day 8; at investigator discretion afterwards on Day 1 of each/every other cycle , and End of Study visit; assessed up to 12 months * Marrow - PD Sampling at pre-dose Cycle 1 Day 1, Cycle 2 Day 1; at investigator discretion afterwards and End of Study visit; assessed up to 12 months
Time frame: Assessed up to 12 months