The objective of this study is to determine if Achilles tendon elongation and gait pattern differ between patients treated using an individualized treatment algorithm and patients treated as usual (two control groups; patients treated operatively and non-operatively). The individualized treatment algorithm is based on ultrasonographic status of tendon overlap and Copenhagen Achilles Length Measure (1). Patients are allocated for operative treatment if there the tendon overlap is less than 25 % or the tendon is elongated with 7% or more compared to the healthy, contralateral achilles tendon.
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
TREATMENT
Masking
SINGLE
Enrollment
60
The most proximal border of the calcaneus and the most distal point of the musculotendinous junction of the medial gastrocnemius muscle is identified and marked on the skin. These two points on the un-injured leg defines the original length of the total Achilles tendon \[1\]. The difference in length between the injure and the un-injured leg determines elongation for the ruptured Achilles tendon. The relative elongation of the ruptured tendon together with overlap of the tendon ends on the cross-sectional area determines the treatment for the patients receiving individualized treatment: 1) patients with 0-6% elongation of the tendon and a minimum of 25% tendon are treated non-operatively 2) patients with 7% elongation or more or less than 25% tendon overlap are treated operatively.
Circulated cast below the knee in maximal, unforced plantar flexion over the ankel.
Department of Physiotherapy and Orthopedical surgery, Copenhagen University Hospital, Amager-Hvidovre
Copenhagen, Hvidovre, Denmark
Three-Dimensional Gait Analysis: Ankle peak power during push-off.
Reflective markers placed on the patients skin with tape on specific anatomical locations, in total 19 markers. The reflective markers are being filmed by 8 infrared cameras hanging on the walls around the laboratory. Thereby, the joint angles during gait will be measured, and, in combination with the ground reaction forces from two force plates embedded in the floor, the joint moments and powers will be calculated.
Time frame: 12 months after started treatment.
Copenhagen Achilles Length Measure
The examination of both the total and the free part of the achilles tendon of both the injured and un-injured leg is performed. The total length of the tendon is defined under the description of the intervention. The free part of the achilles tendon is defined as the distance between the proximal border of calcaneus and the musculotendinous junction of the soleus muscle and the achilles tendon. The method will be used both diagnostically for the individualized treatment and as a secondary endpoint.
Time frame: 6 and 12 months after started treatment.
Three-Dimensional Gait Analysis: Ankle peak power during push-off
Reflective markers placed on the patients skin with tape on specific anatomical locations, in total 19 markers. The reflective markers are being filmed by 8 infrared cameras hanging on the walls around the laboratory. Thereby, the joint angles during gait will be measured, and, in combination with the ground reaction forces from two force plates embedded in the floor, the joint moments and powers will be calculated.
Time frame: 6 months after started treatment.
Three-Dimensional Gait Analysis: Maximal dorsiflexion in the stance phase.
Reflective markers placed on the patients skin with tape on specific anatomical locations, in total 19 markers. The reflective markers are being filmed by 8 infrared cameras hanging on the walls around the laboratory. Thereby, the joint angles during gait will be measured, and, in combination with the ground reaction forces from two force plates embedded in the floor, the joint moments and powers will be calculated.
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Open surgery with suture of the ruptured achilles tendon prior to circulated cast below the knee in maximal, unforced plantar flexion over the ankel.
Time frame: 6 and 12 months after started treatment.
Three-Dimensional Gait Analysis: stiffness of the plantar flexor musculo-tendinous complex during dorsiflexion.
Reflective markers placed on the patients skin with tape on specific anatomical locations, in total 19 markers. The reflective markers are being filmed by 8 infrared cameras hanging on the walls around the laboratory. Thereby, the joint angles during gait will be measured, and, in combination with the ground reaction forces from two force plates embedded in the floor, the joint moments and powers will be calculated.
Time frame: 6 and 12 months after started treatment.
Three-Dimensional Gait Analysis: time of heel-lift
Reflective markers placed on the patients skin with tape on specific anatomical locations, in total 19 markers. The reflective markers are being filmed by 8 infrared cameras hanging on the walls around the laboratory. Thereby, the joint angles during gait will be measured, and, in combination with the ground reaction forces from two force plates embedded in the floor, the joint moments and powers will be calculated.
Time frame: 6 and 12 months after started treatment.
Three-Dimensional Gait Analysis: jumping up and down
Reflective markers placed on the patients skin with tape on specific anatomical locations, in total 19 markers. The reflective markers are being filmed by 8 infrared cameras hanging on the walls around the laboratory. Thereby, the joint angles during gait will be measured, and, in combination with the ground reaction forces from two force plates embedded in the floor, the joint moments and powers will be calculated.
Time frame: 6 and 12 months after started treatment.
Balance measurement
The postural sway with patient standing on a force plate in the gait laboratory.
Time frame: 6 and 12 months after started treatment.