The aim of this study is to evaluate the ability of a prototype power toothbrush (PTB) versus a manual toothbrush in healthy, right-handed manual toothbrush (MTB) participants with no signs of periodontal disease or excessive recession to remove dental plaque after a single tooth brushing event. Prior to each treatment visit, participants will abstain from oral hygiene for a period of 12 hours preceding a pre-brushing dental plaque evaluation. Participants will then brush once under supervision for 2 minutes in 'Gum line' mode and 1-minute in 'Interdental' mode after which re-disclosing and a post-brushing plaque assessment will be carried out.
This study is an exploratory, randomized, single center, 4-treatment, 3-period, partial crossover study in healthy participants with no signs of periodontal disease or excessive recession, to assess a prototype PTB in removing dental plaque after a single brushing event. At the screening visit, following provision of written informed consent, participants will be provided PTB training to familiarize themselves with how the different modes and different PTBs operate. Eligible participants will be provided with a washout fluoride toothpaste and toothbrush for use at home during the study. Participants will then be scheduled to attend appointment after a minimum of 3 days. For each treatment visit, participants must abstain from oral hygiene for a period of 12hours, immediately preceding the pre-brushing dental plaque evaluation. All the participants will undergo an oral soft tissue (OST) examination followed by plaque disclosing and a pre-brushing dental plaque assessment using the Rustogi Modified Navy Plaque Index (RMNPI) index. In in periods 1 and 2, participants will be randomized to the study treatment sequence with the prototype PTB and MTB used in a crossover manner and participants will then brush under supervision followed by disclosing and post-brushing plaque assessments. Participants assigned to the prototype PTB, it will be used for 2 minutes in 'Gum line' mode brushing and 1-minute brushing in 'Interdental' mode. Participants will then brush once (1.3 grams \[g\] ± 0.1 g of assigned toothpaste), under supervision of study staff after which disclosing, and a post-brushing plaque assessment will be carried out. Participants will be allowed to brush with the washout paste following the post assessment plaque assessments. A minimum of three days washout period will follow each treatment period during which period Participants will brush with a standard washout toothpaste
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
OTHER
Masking
NONE
Enrollment
40
Participants will brush their teeth with manual toothbrush and 1.3 g ± 0.1 g of fluoride toothpaste (containing 0.76% w/w sodium monofluorophosphate) for 1-timed minute under supervision of study staff.
Participants will brush their teeth with power toothbrush and 1.3 g ± 0.1 g of fluoride toothpaste (containing 0.76% w/w sodium monofluorophosphate) for 2-timed minute under supervision of study staff.
Participants will brush their teeth with prototype PTB toothbrush and 1.3 g ± 0.1 g of fluoride toothpaste (containing 0.76% w/w sodium monofluorophosphate) for 2-timed minute in "Gum Line" mode under supervision of study staff.
Participants will brush their teeth with prototype PTB toothbrush and 1.3 g ± 0.1 g of fluoride toothpaste (containing 0.76% w/w sodium monofluorophosphate) for 2-timed minute in "Gum Line" mode and 1-timed minute in "Interdental" mode under supervision of study staff.
GSK Investigational Site
Mississauga, Canada
Change in Whole Mouth Rustogi Modified Navy Plaque Index (RMNPI) Score From Pre-Brushing to Post-Brushing (When Prototype Power Toothbrush [PTB] Was Used in 'Gumline' Mode vs a Reference Manual Toothbrush [MTB])
Change in plaque removal efficacy from pre-brushing to post-brushing in whole mouth (sites A to I) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' mode versus a reference MTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 2 minutes of brushing
Change in Marginal RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Gumline' Mode vs a Reference MTB)
Change in plaque removal efficacy from pre-brushing to post-brushing at the gum line (referred as marginal score-sites A to C) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' mode versus a reference MTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 2 minutes of brushing
Change in Proximal RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Gumline' Mode vs a Reference MTB)
Change in plaque removal efficacy from pre-brushing to post-brushing at the proximal tooth areas (referred to as proximal score-sites D and F) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' mode versus a reference MTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 2 minutes of brushing
Change in Whole Mouth RMNPI Score From Pre-brushing to Post-brushing (When Prototype PTB Was Used in 'Combined' Mode vs a Reference MTB)
Change in plaque removal efficacy from pre-brushing to post-brushing in whole mouth (site A to I) was assessed using RMNPI score, when prototype PTB used in the 'Combined' Mode ('Gumline' mode followed by 'Interdental' mode) versus a reference MTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
Change in Marginal RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Combined' Mode vs a Reference MTB)
Change in plaque removal efficacy from pre-brushing to post-brushing at the gum line (referred as marginal score-sites A to C) was assessed using RMNPI score, when prototype PTB used in the 'Combined' Mode ('Gumline' mode for 2 minutes followed by 'Interdental' mode for 1 minute) versus a reference MTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
Change in Proximal RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Combined' Mode vs a Reference MTB)
Change in plaque removal efficacy from pre-brushing to post-brushing at the proximal tooth areas (referred to as proximal score-sites D and F) was assessed using RMNPI score, when prototype PTB used in the 'Combined' Mode ('Gumline' mode for 2 minutes followed by 'Interdental' mode for 1 minute) versus a reference MTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
Change in Whole Mouth RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Gumline' Mode vs 'Combined' Mode)
Change in plaque removal efficacy from pre-brushing to post-brushing in whole mouth (site A to I) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' mode versus prototype PTB used in the 'Combined' Mode ('Gumline' mode for 2 minutes followed by 'Interdental' mode for 1 minute) after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
Change in Marginal RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Gumline' Mode vs 'Combined' Mode)
Change in plaque removal efficacy from pre-brushing to post-brushing at the gum line (referred as marginal score-sites A to C) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' mode versus prototype PTB used in the 'Combined' Mode ('Gumline' mode for 2 minutes followed by 'Interdental' mode for 1 minute) after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
Change in Proximal RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Gumline' Mode vs 'Combined' Mode)
Change in plaque removal efficacy from pre-brushing to post-brushing at the proximal tooth areas (referred to as proximal score-sites D and F) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' mode versus prototype PTB used in the 'Combined' Mode ('Gumline' mode for 2 minutes followed by 'Interdental' mode for 1 minute) after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assigned on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
Change in Whole Mouth RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Gumline' and 'Combined' Modes Versus a Reference PTB)
Change in plaque removal efficacy from pre-brushing to post-brushing in whole mouth (site A to I) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' and 'Combined' mode versus a reference PTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
Change in Marginal RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Gumline' and 'Combined' Modes Versus a Reference PTB)
Change in plaque removal efficacy from pre-brushing to post-brushing at the gum line (referred as marginal score-sites A to C) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' and 'Combined' mode versus a reference PTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
Change in Proximal RMNPI Score From Pre-Brushing to Post-Brushing (When Prototype PTB Was Used in 'Gumline' and 'Combined' Modes Versus a Reference PTB)
Change in plaque removal efficacy from pre-brushing to post-brushing at the proximal tooth areas (referred to as proximal score-sites D and F) was assessed using RMNPI score, when prototype PTB used in the 'Gumline' and 'Combined' mode versus a reference PTB after a single brushing event. Dental plaque was assessed on all teeth excluding third molars (Universal Numbering System teeth 2 to 15, and 18 to 31), crowns, and surfaces with cervical restorations for a maximum of 28 eligible teeth. Plaque was assessed on one of the following score: 0 represents no dental plaque and 1 represents plaque present in the measured segment of the tooth; where lower score represents the better plaque removal efficacy. Change from pre-brushing = (post-brushing score - pre-brushing score).
Time frame: After 3 minutes of brushing
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.