The purpose of this research study is to collect data/measurements that are routinely collected in standard of care cerebral angiogram
Research for this study is to determine how the injection of contrast material influences vessel measurements, as these measurements guide device selection when interventions are warranted. The data will be used to determine if there is a significant change in vessel diameter with intra-arterial injection of contrast material in cerebral angiography, how changes in force of contrast injection augments the significance of the changes in vessel geometry, and the extent of propagation downstream from the catheter tip that such changes in vessel diameter are detected and found to be significant, as these changes could potentially lead to less optimal device selection by providing an overestimation of true vessel diameter.
Study Type
OBSERVATIONAL
Enrollment
1
Subjects will undergo the standard of care cerebral angiogram and any intervention(s) (when applicable) that were discussed with their provider, following the standard procedural protocol for the procedure at WFBMC. There are no additional interventions or changes to the planned intervention(s) that will take place by agreeing to participate in the study. The data collected from this procedure, following the standard of care protocol, will include the following: force of injection of contrast material for each angiographic run (peak pressure associated with injection, duration of peak, and area under pressure curve), volume of contrast utilized, images from the procedure, measurements of vessel diameter at defined distances from the catheter tip utilizing the images, catheter type, any additional device(s) (when applicable) utilized during the procedure, and if spasmolytic agents are utilized (including dose and time of administration).
Wake Forest University Health Sciences
Winston-Salem, North Carolina, United States
Peak pressure associated with injection
The effort force of injection will be measured and recorded for each run using a standard arterial line pressure transducer setup that attaches to the guide catheter, with data acquired via Mediocollector (a program that allows for quantitative recording of data. The duration of peak pressure will be collected.
Time frame: During procedure, up to 10 minutes
The duration of peak pressure
The duration of peak pressure will be collected.
Time frame: During procedure, up to 10 minutes
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.