This was a multicenter, open, multi-cohort extended PHASE I/IIa study, consisting of 2 phases:Phase I (Phase I dose escalation) and Phase II (Phase IIa multi-cohort extension). The objective of this study was to evaluate safety, tolerability, pharmacokinetic characteristics, and initial efficacy in malignant pleural mesothelioma and MSLN in advanced malignant solid tumors.
Phase I dose escalation phase:This study predicted a total of 6 dose groups, 0.1, 0.5, 1.0, 1.5, 2.0 and 2.5 mg/kg. Phase IIa efficacy exploration phase:This phase is the multi-cohort indication expansion phase. Based on the data obtained in phase I, chose an appropriate dose continue to explore multi-cohort indications, including confirmed malignancy Pleural mesothelioma and MSLN expression were determined.
Study Type
INTERVENTIONAL
Allocation
NA
Purpose
TREATMENT
Masking
NONE
Enrollment
198
Phase I:Participants will be allocated to one of the following dose groups: 0.1, 0.5, 1.0, 1.5, 2.0 and 2.5 mg/kg, and receive a treatment of RC88-ADC followed by 21 days of dose limited toxicity (DLT) observation period. Phase IIa indication exploration
National Cancer Center/Cancer Hospital, Chinese Academy of Medical Science and Peking Union Medical College
Beijing, Beijing Municipality, China
Henan Cancer Hospital
Zhengzhou, Henan, China
Drum Tower Hospital
Nanjing, Jiangsu, China
The First Hospital of Jilin University
Changchun, Jilin, China
Phase 1 Adverse events
Adverse events was assessed by investigator(s) according to NCI-CTCAE v4.03
Time frame: From the day of ICF sign to 28 days after the day of the last treatment
Phase 1 Maximum Tolerated dose of RC88
The dose level in which \>= 2 out of 6 patients have dose-limiting toxicity (DLT). The MTD is defined as the previous dose level.
Time frame: 21 days after first treatment.
Phase2
ORR is evaluated by IRC
Time frame: 24 weeks
Phase 1 Objective Response Rate (ORR)
Objective Response Rate was defined as the percentage of participants with a complete response (CR) or partial response (PR)
Time frame: 24 months
Phase 1 Progression Free Survival (PFS)
Progression-free Survival (PFS) (median) was determined using the number of months measured from the initial date of treatment to the date of documented progression, or the date of death (in the absence of progression) of participants. Progression is defined using Response Evaluation Criteria In Solid Tumors Criteria (RECIST v1.1), as a 20% increase in the sum of the longest diameter of target lesions, or a measurable increase in a non-target lesion, or the appearance of new lesions.
Time frame: 24 months
Phase 1 and Phase2 Pharmacokinetics (PK) parameter for total antibody (TAb): Maximum concentration (Cmax)
Cmax will be derived from the PK blood samples collected.
Time frame: Phase 1:Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hour (hr), 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.Phase2 (Whole test cycle)
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Phase 1 and Phase2 PK parameter for TAb: Time to maximum concentration (Tmax)
Tmax will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.Phase2 (Whole test cycle)
Phase 1 PK parameter for TAb: Area under the concentration-time curve (AUC)
AUC will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Phase 1 PK parameter for TAb: Trough concentration (Ctrough)
Ctrough will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Phase 1 PK parameter for TAb: Terminal or apparent terminal half-life (t1/2)
t1/2 will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Phase 1 PK parameter for TAb: Systemic clearance (CL)
CL will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Phase 1 PK parameter for antibody-drug conjugate (ADC): Cmax
Cmax will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Phase 1 PK parameter for ADC: Tmax
Tmax will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Phase 1 PK parameter for ADC: AUC
AUC will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Phase 1 PK parameter for ADC: Ctrough
Ctrough will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Phase 1 PK parameter for ADC: t1/2
t1/2 will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
PK parameter for ADC: CL
CL will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
PK parameter for Monomethyl Auristatin E (MMAE): Cmax
Cmax will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
PK parameter for MMAE: Tmax
Tmax will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
PK parameter for MMAE: AUC
AUC will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
PK parameter for MMAE: Ctrough
Ctrough will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
PK parameter for MMAE: t1/2
t1/2 will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
PK parameter for MMAE: CL
CL will be derived from the PK blood samples collected.
Time frame: Cycle 1 and Cycle 3 (each cycle is 21 days): pre-dose, 0.5 hr, 1 hr, 1.5 hrs, 12 hrs, 24 hrs, 48 hrs, 72 hrs, 120 hrs, 168 hrs, 240 hrs (and 336 hrs) after start of infusion. Cycle 2: pre-dose.
Immunogenicity assessment
Assessment of anti-RC88 antibodies
Time frame: Cycle 1 to Cycle 3 (each cycle is 21 days): pre-dose, and 336 hrs after start of infusion (cycle 3 only).