The aim of this study is to assess the pharmacokinetics (PK) of the parent drug 5-aminolevulinic acid (ALA) and its active metabolite protoporphyrin IX (PpIX) during photodynamic therapy with 3 tubes of BF-200 ALA 10% gel (Ameluz®) in combination with the BF-RhodoLED® lamp in the systemic circulation of diseased individuals presenting with actinic keratosis (AK) on the face/scalp or in the periphery (neck/trunk/extremities) along with subjects' safety/tolerability during and after treatment.
Study Type
INTERVENTIONAL
Allocation
NA
Purpose
TREATMENT
Masking
NONE
Enrollment
48
Combination Product: Photodynamic therapy (PDT) using BF-RhodoLED® (ALA-PDT, Ameluz®-PDT).
DermResearch Inc.
Austin, Texas, United States
Assessment of Baseline-adjusted Plasma Concentration-time Curves for ALA After a Single PDT Treatment Applying 3 Tubes of BF-200 ALA in Conjunction With the BF-RhodoLED® Under Maximal Use Conditions in Subjects With Mild to Severe Actinic Keratosis.
Blood samples for ALA analysis for each subject were collected, starting at Visit 1 and then 0.5h prior to BF-200 ALA application for up to 10h afterwards. The concentrations of ALA in plasma were measured by an analytical laboratory using validated, internally standardized liquid chromatography-tandem mass spectrometry methods.
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Assessment of Baseline-adjusted Plasma Concentration-time Curves for PpIX After a Single PDT Treatment Applying 3 Tubes of BF-200 ALA in Conjunction With the BF-RhodoLED® Under Maximal Use Conditions in Subjects With Mild to Severe Actinic Keratosis.
Blood samples for PpIX analysis for each subject were collected, starting at Visit 1 and then 0.5h prior to BF-200 ALA application for up to 10h afterwards. The concentrations of PpIX in plasma were measured by an analytical laboratory using validated, internally standardized liquid chromatography-tandem mass spectrometry methods.
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of ALA.
Parameter: AUC(0-t) (Area Under Curve); area under the baseline-adjusted plasma concentration-time curve from time zero to the last sampling time point at which the concentration was at or above lower limit of quantification; t(last) is defined as the last value \>0 after baseline adjustment.
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of ALA.
Parameter: AUC(0-∞) (Area Under Curve); area under the baseline-adjusted plasma concentration-time data extrapolated to infinity
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of ALA.
Parameter: %AUC(t-∞) (Area Under Curve); proportion of extrapolated part
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of ALA.
Parameter: Cmax (Maximum Plasma Concentration); observed maximum baseline-adjusted plasma concentration
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of ALA.
Parameter: Tmax (time to reach Cmax)
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of ALA.
Parameter: λz (Elimination Rate Constant); λz denotes the terminal rate constant estimated by linear regression analysis from a range of concentrations in the terminal phase estimated for each treatment and subject by log-linear regression from the linear portion of the logarithmic transformed concentration-time plot. The algorithm will start with the last 3 points with quantifiable concentrations and increases the number of involved points by 1 until the time point after Cmax restricted on time points after removing of the BF-200 ALA gel (all PK samples after the gel is wiped off \[after 3h±10 min); λz was only determined in subjects in which the log-linear terminal phase could clearly be defined. Resulting unreliable parameters were flagged accordingly and not used in descriptive statistics. If any pharmacokinetic parameter should have been classified as unreliable, all calculations that use this parameter were considered missing.
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of ALA.
Parameter: t1/2 (apparent terminal half-life); calculated by ln2/λz; t1/2 was only determined in subjects in which the log-linear terminal phase could clearly be defined. Resulting unreliable parameters were flagged accordingly and not used in descriptive statistics. If any pharmacokinetic parameter should have been classified as unreliable, all calculations that use this parameter were considered missing.
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of PpIX.
Parameter: AUC(0-t) (Area Under Curve); area under the baseline-adjusted plasma concentration-time curve from time zero to the last sampling time point at which the concentration was at or above lower limit of quantification; t(last) is defined as the last value \>0 after baseline adjustment.
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of PpIX.
Parameter: AUC(0-∞) (Area Under Curve); area under the baseline-adjusted plasma concentration-time data extrapolated to infinity
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of PpIX.
Parameter: %AUC(t-∞) (Area Under Curve); proportion of extrapolated part
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of PpIX.
Parameter: Cmax (Maximum Plasma Concentration); observed maximum baseline-adjusted plasma concentration
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of PpIX.
Parameter: Tmax (time to reach Cmax)
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of PpIX.
Parameter: λz (Elimination Rate Constant); λz denotes the terminal rate constant estimated by linear regression analysis from a range of concentrations in the terminal phase estimated for each treatment and subject by log-linear regression from the linear portion of the logarithmic transformed concentration-time plot. The algorithm will start with the last 3 points with quantifiable concentrations and increases the number of involved points by 1 until the time point after Cmax restricted on time points after removing of the BF-200 ALA gel (all PK samples after the gel is wiped off \[after 3h±10 min); λz was only determined in subjects in which the log-linear terminal phase could clearly be defined. Resulting unreliable parameters were flagged accordingly and not used in descriptive statistics. If any pharmacokinetic parameter should have been classified as unreliable, all calculations that use this parameter were considered missing.
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Evaluation of Baseline-adjusted Pharmacokinetic Parameters of PpIX.
Parameter: t1/2 (apparent terminal half-life); calculated by ln2/λz; t1/2 was only determined in subjects in which the log-linear terminal phase could clearly be defined. Resulting unreliable parameters were flagged accordingly and not used in descriptive statistics. If any pharmacokinetic parameter should have been classified as unreliable, all calculations that use this parameter were considered missing.
Time frame: On treatment day (day 0): 0.5, 1, 1.5, 2, 2.5, 3*, 3.5, 4, 5, 6, 8, 10 hours post-dose (*prior to illumination)
Assessment of the Frequency and Severity of All Treatment-emergent Adverse Events (TEAEs), Including Serious Adverse Events (SAEs) in Response to PDT With BF-200 ALA Under Maximal Use Conditions.
Frequency of treatment-emergent adverse events (TEAEs),including serious adverse events (SAEs).
Time frame: On treatment day until end of study approximately 4 weeks after treatment day (day 0)
Assessment of Pain Intensity at the Application Site in Response to PDT With BF-200 ALA Under Maximal Use Conditions Using an 11-point Numeric Rating Scale (NRS-11), Where a Score of 0 Means "no Pain" and a Score of 10 Means "Worst Imaginable Pain".
Assessment of pain at the application site using an 11-point Numeric Rating Scale (NRS-11) ranging from 0 (no pain) to 10 (worst imaginable pain)
Time frame: On treatment day until end of study approximately 4 weeks after treatment day (day 0)
Assessment of Frequency and Severity of Application Site Discomfort in Response to PDT With BF-200 ALA Under Maximal Use Conditions.
Application site reactions: discomfort (burning, pain, itching, stinging, warmth, others)
Time frame: On treatment day until end of study approximately 4 weeks after treatment day (day 0)
Assessment of Frequency and Severity of Application Site Skin Reactions in Response to PDT With BF-200 ALA Under Maximal Use Conditions.
Application site reactions: skin reactions (erythema, edema, induration, vesicles, erosion, ulceration, scaling/flaking, scabbing/crusting, discharge/exudate, others); maximum severity of AE: mild, moderate, or severe
Time frame: On treatment day until end of study approximately 4 weeks after treatment day (day 0)
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.