Movement during everyday activities most often requires stable posture. Postural control corresponds to a complex motor ability to maintain / re-establish balance and orient one's body in the environment. Postural stability and equilibrium deteriorate with age. More than 30% of people over 65 years old fall per year. Falls represent 90% of hip fractures and sometimes result in lasting psychological effects. Shoes are our direct link between the ground and our feet. Wearing shoes plays a major role in postural control. The characteristics of shoes usually worn by elderly people are identified with those of shoes known to be 'dangerous'. In order to improve stability and reduce the risk of falling for the elderly, Axis-Comfort Development® has developed "experimental balance shoes". Their shoes have technical characteristics presented in the scientific literature as beneficial for postural stability. Therefore, the aim of this study was to investigate the effects of wearing experimental balance shoes on postural balance compared with the people's own shoes. We assumed that postural balance would be improved by experimental balance shoes in an acute way and improved by a familiarization phase. This was a controlled, randomized, blind and cross-over study. three sessions were held in our center, each time interspersed with a phase of familiarization at home (7 to 10 days) during which the people had to wear either the experimental balance shoes or their own personal shoes. 21 volunteers in total participated in this study, all between 65 and 75 years old. Five tests were presented randomly for each session and all tests were carried out on a Huber 360 ® (LPG System, France) stabilometric platform. The mains criteria were static equilibrium on one foot and two feet (with eyes open and closed) and secondary criteria were stride frequency during the walk on the spot and stability limits. An improvement of these multiple criteria during the different sessions would be proof of the positive effect of experimental balance shoes on postural balance in the elderly.
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
BASIC_SCIENCE
Masking
SINGLE
Enrollment
21
Use of experimental balance shoes for carrying out the tests along the three sessions and one of the two familiarization phases
Use of Personal shoes (the same for each session) for carrying out the tests along the three sessions and one of the two familiarization phases
Centre d'Expertise de la Performance - Université de Bourgogne
Dijon, Côte d'Or, France
Assessing change of the displacement surface of the center of pressure between the three sessions during static balance on a foot with open eyes
Surface of the displacement of the centre of pressure (Value in square millimeters, mm²) during 30 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the length of the displacement of the centre of pressure between the three sessions during static balance on a foot with open eyes
Length of the displacement of the centre of pressure (Value in millimeters, mm) during 30 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the number of rebalancing gestures between the three sessions during static balance on a foot with open eyes
Number of rebalancing gestures (with the foot or with the hand during test) during 30 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the displacement surface of the center of pressure between the three sessions during static balance on two feet open eyes
Surface of the displacement of the centre of pressure (Value in square millimeters, mm²) during 50 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the length of the displacement of the centre of pressure between the three sessions during static balance on two feet open eyes
Length of the displacement of the centre of pressure (Value in millimeters, mm) during 50 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the average speed of the displacement of the centre of pressure between the three sessions during static balance on two feet open eyes
Average speed of the displacement of the centre of pressure (Value in millimeters per second, mm/s) during 50 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the number of rebalancing gestures between the three sessions during static balance on two feet open eyes
Number of rebalancing gestures (with the foot or with the hand during test) during 50 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in walking capacity between the three sessions
Walk at the pace following the change of the Left (on right foot and left leg detached) and Right (opposite) visuals on the platform screen for 50 seconds. Subjects were asked to lift their feet using enough hip flexion to bring the foot halfway up the support leg. The expected number of strides was around 96. Measured on a Huber 360 ® (LPG System, France) force platform (number of strides).
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in stability limits between the three sessions at 0°
Maximal displacement of the centre of pressure at 0°. 8 seconds to go as far as possible (Value in degrees, °). Measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in stability limits between the three sessions at 45°
Maximal displacement of the centre of pressure at 45°. 8 seconds to go as far as possible (Value in degrees, °). Measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in stability limits between the three sessions at 90°
Maximal displacement of the centre of pressure at 90°. 8 seconds to go as far as possible (Value in degrees, °). Measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in stability limits between the three sessions at 135°
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Maximal displacement of the centre of pressure at 135°. 8 seconds to go as far as possible (Value in degrees, °). Measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in stability limits between the three sessions at 180°
Maximal displacement of the centre of pressure at 180°. 8 seconds to go as far as possible (Value in degrees, °). Measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in stability limits between the three sessions at 225°
Maximal displacement of the centre of pressure at 225°. 8 seconds to go as far as possible (Value in degrees, °). Measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in stability limits between the three sessions at 270°
Maximal displacement of the centre of pressure at 270°. 8 seconds to go as far as possible (Value in degrees, °). Measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change in stability limits between the three sessions at 315°
Maximal displacement of the centre of pressure at 315°. 8 seconds to go as far as possible (Value in degrees, °). Measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Subjective assessment of the comfort linked to the wearing of the experimental balance shoes
The question was : "How do you feel in general wearing Balance Shoes?" with 4 predefined answers : (1) "Very comfortable" ; (2) "Comfortable" ; (3)"Normal" and (4) "Uncomfortable". Questionary was anonymous
Time frame: Measured after wearing experimental balance shoes for a week (familiarization's period)
Subjective assessment of the aesthetics linked to wearing of the experimental balance shoes
The question was : "How do you find the aesthetics of Balance Shoes?" with 4 predefined answers : (1) "To my liking" ; (2) "Correct" ; (3)"Not to my liking" and (4) "No opinion". Questionary was anonymous
Time frame: Measured after wearing experimental balance shoes for a week (familiarization's period)
Subjective assessment of the stability linked to wearing of the experimental balance shoes
The question was : "Did you feel more stable wearing Balance Shoes?" with 2 predefined answers : (1) "Yes" ; (2) "No". Questionary was anonymous
Time frame: Measured after wearing experimental balance shoes for a week (familiarization's period)
Subjective assessment of the safety linked to wearing of the experimental balance shoes
The question was : "Did you feel safer wearing Balance Shoes?" with 2 predefined answers : (1)"Yes" ; (2) "No". Questionary was anonymous
Time frame: Measured after wearing experimental balance shoes for a week (familiarization's period)
Assessing change of the displacement surface of the center of pressure between the three sessions during static balance on two feet closed eyes
Surface of the displacement of the centre of pressure (Value in square millimeters, mm²) during 50 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the length of the displacement of the centre of pressure between the three sessions during static balance on two feet closed eyes
Length of the displacement of the centre of pressure (Value in millimeters, mm) during 50 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the average speed of the displacement of the centre of pressure between the three sessions during static balance on two feet open eyes
Average speed of the displacement of the centre of pressure (Value in millimeters per second, mm/s) during 50 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session
Assessing change of the number of rebalancing gestures between the three sessions during static balance on two feet open eyes
Number of rebalancing gestures (with the foot or with the hand during test) during 50 seconds was measured on a Huber 360 ® (LPG System, France) force platform.
Time frame: Measure during the three sessions and for both conditions (balance or personal). 1 minute recovery between tests. 7 to 10 days between the three sessions (familiarization). Test appearance order is random for each session