The purpose of this pilot study is to demonstrate the ability to warm critically ill patients with sepsis to a target temperature of 39°C
Participants with sepsis and without fever will be warmed with surface (forced air and conductive wraps) and core (esophageal) warming, and will have the warming devices placed in the ICU. The warming devices will remain in place until the study is completed (36 hours). The heat exchangers will be set to attain a patient target temperature of 39°C as rapidly as possible, after which the forced-air (non-servo) system will be removed, and the conductive system heat exchanger (powering the water blankets and esophageal device, both of which are servo-controlled) will be set to maintain patient temperature at 39°C for the duration of the study period. Once goal temperature has been achieved for 2 consecutive hours, the forced air warming device will be discontinued. Patients will be randomized at this point to Group 1, in which esophageal warming will be discontinued first or to Group 2, in which external conductive warming will be discontinued first. All patients will have usual standard of care labs, vital signs, and imaging for patients undergoing mechanical ventilation in the ICU. For the duration of the 36-hour intervention, patient vital signs, including blood pressure, heart rate, respiratory rate, and vasopressor requirements will be monitored and recorded every 6 hours. Core temperature will be measured and recorded hourly. Patient's clinical status and outcome will be reviewed in the medical chart 7 days after study completion.
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
TREATMENT
Masking
NONE
In order to evaluate the ability to reliably raise patient temperature to a target of 39.0°C, patients will be warmed with forced air warming, surface conductive warming, and esophageal core warming. After 4 hours at target temperature, esophageal warming will be discontinued.
In order to evaluate the ability to reliably raise patient temperature to a target of 39.0°C, patients will be warmed with forced air warming, surface conductive warming, and esophageal core warming. After 4 hours at target temperature, conductive warming will be discontinued.
University of Iowa Hospitals and Clinics
Iowa City, Iowa, United States
Hennepin County Medical Center
Minneapolis, Minnesota, United States
Washington University
St Louis, Missouri, United States
Feasibility of warming critically ill patients with sepsis using a multimodal sepsis warming protocol.
Our primary outcome is the proportion of patients who achieve goal temperature within 6 hours of starting warming. After discontinuing devices, we will monitor the proportion of participants who remain at the goal temperature. Warming will be performed using standard technique per instructions for use for the surface warming wraps, esophageal heat transfer device, and forced air warming device. The heat exchanger will be set to a target patient temperature of 39°C, with patient temperature measured via temperature sensing Foley catheter or rectal temperature sensor. Feedback (servo) control is provided by the heat exchanger (Blanketrol III, Gentherm Medical, Cincinnati, OH), such that the water temperature flow through the warming devices is adjusted automatically to enable attainment of the target temperature. Forced air warming will be used until goal temperature is reached for at least 2 hours, then other devices will be used to maintain temperature.
Time frame: 36 hours
Determine the rate of temperature change of patients undergoing a sepsis warming protocol.
Participants will be initiated on a warming protocol with forced air warming, surface conductive, and esophageal core warming with the target temperature of 39°C. Patient temperature measurement will be collected hourly during the study period (36 hours).
Time frame: 36 hours
Determine the ability of conductive heat wraps vs. conductive esophageal device to maintain therapeutic hyperthermia
Once goal temperature has been achieved for 2 consecutive hours, the forced air warming device will be discontinued. Participants will be randomized at this point to Group 1, in which esophageal warming will be discontinued first or to Group 2, in which external conductive warming will be discontinued first. Once goal temperature has been achieved for 4 consecutive hours after discontinuation of the forced air warming device, the second device will be discontinued. If patient body temperature drops below goal temperature, the second warming device will be restarted to maintain temperature.
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Time frame: 36 hours