The aim of this study is to assess if there are significant differences in the failure rate of stainless steel and ceramic brackets. For this study, patients will be enrolled and divided into two groups, according to the type of brackets (stainless steel or ceramic) used for orthodontic treatment. Failure rates will be recorded every month for 12 months and survival analysis will be performed, together with skeletal and space analysis.
This clinical trial aims to investigate if there are differences in the failure rates of stainless steel and ceramic orthodontic brackets. Patients willing to start orthodontic fixed therapy and recruited for the study will be asked to sign the informed consent. Parents will sign the consent for underage patients. After that, patients will be divided into two groups: * Group MET: stainless steel brackets will be bonded on the vestibular surfaces of teeth. * Group CER: ceramic brackets will be bonded on the vestibular surfaces of teeth. The following sequence of archwires will be adopted for the first six months: 0.012-in Niti, 0.014-in Niti, 0.016-in NiTi, 0.018 SS Australian, 0.020 SS Australian, 0.017X0.025-in NiTi, 0.019X0.025-in SS. The failure rates of the brackets will be recorded each month for 12 months. Each failed bracket will be recorded once. For each patient, pre-treatment lateral cephalometric radiograph and study models will be used to measure ANB angle, Wits, Skeletal Class, dento-alveolar discrepancy and Little Index at the beginning of the treatment. Bond failures will be recorded together with the archwire engaged at the moment of the failure. Sample size Sample size was calculated with the following assumptions: ability to detect a clinically relevant difference of 4.935% in the failure rates (primary outcome) of the two groups with an alfa = 0.05 and power = 80%. The assumptions were based on findings of a previous study with an expected value of 12.08% for the first group at the end of 12 months of therapy. Therefore, 800 brackets (40 patients) per group were required for the study. Statistical analysis Statistical analysis will be conducted with R software (R version 3.1.3, R Development Core Team, R Foundation for Statistical Computing, Wien, Austria). Fisher exact test will be performed to evaluate the differences between the failure rates of the two groups, between anterior and posterior sites and between upper and lower arches. Kaplan-Meier survival analysis of the bond failures will be performed among the 12 months of the study. Linear regressions will be calculated to assess the effects on bond failure of the skeletal and dental variables collected before the bonding procedure. Significance for all statistical tests will be predetermined at P\<0.05.
Study Type
INTERVENTIONAL
Allocation
NON_RANDOMIZED
Purpose
DIAGNOSTIC
Masking
DOUBLE
Enrollment
80
Orthophosphoric acid 37% acid (Gerhò Etchant gel 37%, Gerhò spa, Terlano, Italy) will be applied for 30 s for the etching of the vestibular surfaces of teeth. The, after rinsing and drying, a thin layer of Transbond XT Light Cure Adhesive Primer (3M Unitek, Monrovia, CA, USA) will be applied and then cured for 10 s with a LED unit. At last, Transbond XT Light Cure Adhesive Paste (3M Unitek) will be applied on the base of stainless steel brackets (Queen Series Low Profile Brackets MBT 0.022", Aestetika, Terni, TR, Italy); brackets will be applied on the vestibular surfaces of teeth with a light pressure and the extra paste will be removed. Curing will be performed with the LED unit at 2 mm distant from the enamel-bracket interface for 40 s, 10 s per each surface (mesial, distal, gingival and occlusal). The following sequence of archwires will be adopted for the first six months: 0.012-in Niti, 0.014-in Niti, 0.016-in NiTi, 0.018 SS, 0.020 SS, 0.017X0.025-in NiTi, 0.019X0.025-in SS.
Orthophosphoric acid 37% acid (Gerhò Etchant gel 37%, Gerhò spa, Terlano, Italy) will be applied for 30 s for the etching of the vestibular surfaces of teeth. The, after rinsing and drying, a thin layer of Transbond XT Light Cure Adhesive Primer (3M Unitek, Monrovia, CA, USA) will be applied and then cured for 10 s with a LED unit. At last, Transbond XT Light Cure Adhesive Paste (3M Unitek) will be applied on the base of ceramic brackets; brackets (Super Clear Series Brackets MBT 0.022", Aestetika, Terni, TR, Italy) will be applied on the vestibular surfaces of teeth with a light pressure and the extra paste is removed. Curing will be performed with the LED unit at 2 mm distant from the enamel-bracket interface for 40 s, 10 s per each surface (mesial, distal, gingival and occlusal). Then, the following sequence of archwires will be adopted for the first six months: 0.012-in Niti, 0.014-in Niti, 0.016-in NiTi, 0.018 SS, 0.020 SS, 0.017X0.025-in NiTi, 0.019X0.025-in SS
Unit of Orthodontics and Pediatric Dentistry - Section of Dentistry - Department of Clinical, Surgical, Diagnostic and Pediatrics - University of Pavia
Pavia, Lombardy, Italy
Failure rates of metallic and ceramic brackets.
Each month, failed brackets will be recorded. Per each tooth, failure will be recorded once.
Time frame: Among the 12 months of the study.
Failure rates of metallic and ceramic brackets per sites and sides.
Failures will be divided in "anterior" for brackets failed on incisors and canines, and "posterior" for premolar brackets. Failure will be recorded per dental arch ("upper" and "lower") and per archwire (.014-in NiTi, .016-in NiTi, .017X0.25-in NiTi, .019X.025-in SS). Per each tooth, failure will be recorded once.
Time frame: Among the 12 months of the study.
ANB angle
ANB angle will be calculated using the pre-treatment lateral cephalometric radiograph.
Time frame: Before the beginning of the orthodontic treatment.
Wits Index
Wits Index will be calculated using the pre-treatment lateral cephalometric radiograph.
Time frame: Before the beginning of the orthodontic treatment.
Skeletal Class
Skeletal Class will be assessed using ANB angle and Wits Index will be calculated using the pre-treatment lateral cephalometric radiograph.
Time frame: Before the beginning of the orthodontic treatment.
Dento-alveolar discrepancy
Dento-alveolar discrepancy will be calculated using the pre-treatment study models.
Time frame: Before the beginning of the orthodontic treatment.
Little Index
Little Index will be calculated using the pre-treatment study models.
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Time frame: Before the beginning of the orthodontic treatment.