This study will include 20 healthy subjects with intact skin on their lower legs that meet inclusion criteria. Participants will serve as their own control, by heating one leg and not the other. The radiofrequency device consists of a 4 by 6 inch heating pad connected to a temperature controller. Subjects will receive weekly treatments for 4 weeks, and will be re-evaluated 4 weeks after the last treatment to assess any tissue changes that continue after the treatments have concluded.
This study will include 20 healthy subjects with intact skin on their lower legs that meet inclusion criteria below. Participants will serve as their own control, by heating one leg and not the other. The radiofrequency device consists of a 4 by 6 inch heating pad connected to a temperature controller. The pad will be applied to the back of the leg and will covered using a compression stocking. The other leg will receive a pad and compression stocking, but radiofrequency will not be applied (no heating). At the first visit, subjects will be asked to fill out a healthcare questionnaire. With each weekly treatment, subjects will be evaluated to assess how their legs feel on a scale of 1-10, with 1 being no discomfort and 10 being intense pain. Their legs will be photographed before and after radiofrequency MH to examine any visible changes to the tissue. Study team will then use a PeriScan PIM 3 System Laser Doppler scanning for blood perfusion before the Thermofield treatment. The radiofrequency will be set to achieve 40°C/107.6°F) and maintain this temperature consistently during the application time. This temperature is mild and may feel like a drugstore heating pad. The device will be turned on on one leg and will remain off on the other. The time for the heating will be 36 minutes, during which participants will remain in a reclined position, with their legs elevated. The device takes approximately 6 minutes to achieve a tissue temperature of 40°C, and the treatment time with consistent temperature application will be 30 minutes. Study team will then use a PeriScan PIM 3 System Laser Doppler scanning for blood perfusion after the Thermofield treatment ends. Study team will take thermal imaging photographs of the treatment area following each treatment. Subjects will receive weekly treatments for 4 weeks, and will be re-evaluated 4 weeks after the last treatment to assess any tissue changes that continue after the treatments have concluded. Subjects will be excluded from the study if they develop any kind of intolerance to the MH treatment, like increased pain or unexpected skin changes. If they receive a significant injury or wound that is not due to the study, such that the skin of the lower leg is no longer intact, they will be excluded from the study.
Study Type
Study team will use a PeriScan PIM 3 System Laser Doppler to scan for blood perfusion before and after the Thermofield treatment. The PeriScan PIM 3 System is for non-invasive two-dimensional imaging of peripheral tissue.
The radiofrequency will be set to achieve 42°C/107.6°F) and maintain this temperature consistently during the application time. This temperature is mild and may feel like a drugstore heating pad. The device will be turned on on one leg and will remain off on the other. The time for the heating will be 36 minutes, during which participants will remain in a reclined position, with their legs elevated. The device takes approximately 6 minutes to achieve a tissue temperature of 42°C, and the treatment time with consistent temperature application will be 30 minutes.
Atrium Health Wake Forest Baptist
Winston-Salem, North Carolina, United States
Mean Temperature Change- Skin Evaluation on Leg With Device
To help determine safety during and after dermal application for generating elevated temperatures
Time frame: week 1
Mean Temperature Change- Skin Evaluation on Leg With Device
To help determine safety during and after dermal application for generating elevated temperatures
Time frame: week 2
Mean Temperature Change- Skin Evaluation on Leg With Device
To help determine safety during and after dermal application for generating elevated temperatures
Time frame: week 3
Mean Temperature Change- Skin Evaluation on Leg With Device
To help determine safety during and after dermal application for generating elevated temperatures
Time frame: week 4
Mean Change in Blood Perfusion Assessment - mL/kg/Min
Demonstrate that the Thermofield device improves blood flow to the tissue region where it has been applied. Laser Doppler scanning will be done on the skin before and after application of the hyperthermia device to quantitatively measure changes in blood perfusion after treatment. Blood perfusion via laser Doppler will also be used to asses increases or decreases in blood perfusion that would indicate harm, such as decreased perfusion - Blood flow is usually given in units mL/(100 g \* min)
Time frame: week 1
Blood Perfusion Assessment - mL/kg/Min
Demonstrate that the Thermofield device improves blood flow to the tissue region where it has been applied. Laser Doppler scanning will be done on the skin before and after application of the hyperthermia device to quantitatively measure changes in blood perfusion after treatment. Blood perfusion via laser Doppler will also be used to asses increases or decreases in blood perfusion that would indicate harm, such as decreased perfusion - Blood flow is usually given in units mL/(100 g \* min)
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
INTERVENTIONAL
Allocation
NA
Purpose
SUPPORTIVE_CARE
Masking
NONE
Enrollment
20
Study team will take thermal imaging photographs of the treatment area following each treatment.
A survey tool created to collect info from participants including: 1. Name 2. Age 3. Weight/ height 4. Pregnant or nursing? 5. History of blood clots? 6. Any wound healing problems? 7. Any active open wounds on the legs? 8. Any autoimmune disorders? 9. Phone number 10. Email address A measurement of the participants calf will be taken as well using a measuring tape.
Time frame: week 2
Blood Perfusion Assessment - mL/kg/Min
Demonstrate that the Thermofield device improves blood flow to the tissue region where it has been applied. Laser Doppler scanning will be done on the skin before and after application of the hyperthermia device to quantitatively measure changes in blood perfusion after treatment. Blood perfusion via laser Doppler will also be used to asses increases or decreases in blood perfusion that would indicate harm, such as decreased perfusion - Blood flow is usually given in units mL/(100 g \* min)
Time frame: week 3
Blood Perfusion Assessment - mL/kg/Min
Demonstrate that the Thermofield device improves blood flow to the tissue region where it has been applied. Laser Doppler scanning will be done on the skin before and after application of the hyperthermia device to quantitatively measure changes in blood perfusion after treatment. Blood perfusion via laser Doppler will also be used to asses increases or decreases in blood perfusion that would indicate harm, such as decreased perfusion - Blood flow is usually given in units mL/(100 g \* min)
Time frame: week 4
Blood Perfusion Assessment - mL/kg/Min
Demonstrate that the Thermofield device improves blood flow to the tissue region where it has been applied. Laser Doppler scanning will be done on the skin before and after application of the hyperthermia device to quantitatively measure changes in blood perfusion after treatment. Blood perfusion via laser Doppler will also be used to asses increases or decreases in blood perfusion that would indicate harm, such as decreased perfusion - Blood flow is usually given in units mL/(100 g \* min)
Time frame: week 8
Change in Comfort Level Scores of Participants Receiving Hyperthermia Treatment
A pain score/ 'How are you feeling?' survey will be used at each session before and after hyperthermia treatment. The scale of 0 meaning non pain/ feel fine to 10 being the maximum pain/ not feeling well will be used.
Time frame: week 1
Change in Comfort Level Scores of Participants Receiving Hyperthermia Treatment
A pain score/ 'How are you feeling?' survey will be used at each session before and after hyperthermia treatment. The scale of 0 meaning non pain/ feel fine to 10 being the maximum pain/ not feeling well will be used.
Time frame: week 2
Change in Comfort Level Scores of Participants Receiving Hyperthermia Treatment
A pain score/ 'How are you feeling?' survey will be used at each session before and after hyperthermia treatment. The scale of 0 meaning non pain/ feel fine to 10 being the maximum pain/ not feeling well will be used.
Time frame: week 3
Change in Comfort Level Scores of Participants Receiving Hyperthermia Treatment
A pain score/ 'How are you feeling?' survey will be used at each session before and after hyperthermia treatment. The scale of 0 meaning non pain/ feel fine to 10 being the maximum pain/ not feeling well will be used.
Time frame: week 4
Change in Comfort Level Scores of Participants Receiving Hyperthermia Treatment
A pain score/ 'How are you feeling?' survey will be used at each session before and after hyperthermia treatment. The scale of 0 meaning non pain/ feel fine to 10 being the maximum pain/ not feeling well will be used.
Time frame: week 8
Safety: Number of Blister Formations
Cumulative number of blisters formed across all participants during weekly sessions from week 1 to 8 is reported in the data table.
Time frame: From week 1 through week 8
Safety: Significant Changes in Redness
Number of participants with significant changes in redness that required intervention.
Time frame: from week 1 through week 8
Number of Participants Who Attended the Session
The number of participants who attend hyperthermia sessions will be documented.
Time frame: week 1
Number of Participants Who Attended the Session
The number of participants who attend hyperthermia sessions will be documented.
Time frame: week 2
Number of Participants Who Attended the Session
The number of participants who attend hyperthermia sessions will be documented.
Time frame: week 3
Number of Participants Who Attended the Session
The number of participants who attend hyperthermia sessions will be documented.
Time frame: week 4