High frequency oscillations of non-ionizing electromagnetic fields range can heat deep tissues in a well-localized region. Recently, a new SWD-based model showed to be a promising tool for investigating muscle pain in humans. The main advantages of the model are its noninvasiveness, the ability to control stimulation parameters, and the convenience of the time frame in which pain and hyperalgesia are developed. This study assess the reliability of SWD pain model to induced transient and intensity-controlled muscle soreness on shoulder in healthy volunteers.
This Test-Retest Reliability study comprises a sample of 31 healthy volunteers. Volunteers will be invited to participate in the study through social networks and e-mail. Experimental pain model assessment The radiofrequency electromagnetic fields can be produced in the range of 3 kHz to 300 GHz, but frequencies around 27 MHz (short-wave) are preferred to heat deep tissues. Deep tissue heating by means of RF is a safe and extensively used technique in palliative treatment of pain and as a healing agent in soft tissues. This study assess the reliability of SWD to induce soreness. The study will be conducted in two experimental sessions on different days, at least 48 to 72 hours apart each other in order to avoid carryover effects. In each experimental session, several measures will be performed to assess different physiological parameters, including: pressure pain thresholds (PPT), specific self-report questionnaire, isometric muscle strength, pain distribution and myoelectric activity. In the first session (Test), participants will be interviewed to collect anthropometric data and health history. Basic upper quadrant physical examination will be performed to check inclusion and exclusion criteria. Before and after the application of SWD, several assessments will be performed. Among the different assessment, myoelectric activity of infraspinatus and deltoid muscle will be recorded during isometric arm lifting task. The isometric task will consist in maintaining the arm in 90 degree elevation in the scapular plane (arm flexion) for 8 seconds. This task will be repeated 5 times with 15 seconds of rest between each trial. Finally, a fatiguing motor task will be performed, consisting of flexion and extension of the arm executed cyclically in a range of motion between 30 and 90 degree in the scapular plane. To ensure fatigue, volunteers will perform the task with an additional weight. The size of the weight will be calculated according to each volunteer body mass (1.25 kg in participants under 68 kg and 2.5 kg in participants over 68 kg). The arm flexion and extension speed will be guided using a 60 beats/s metronome. Same process will be repeated in the second session (Retest). Sample size considerations: All the reliability assessment methods used in this study are related to the within-subject standard deviation (SD\_w). For a test-retest experiment, the SD\_w can be calculated as〖 SD〗\_w=(SD\_diff)⁄√2, and the LoA can be reformulated as bias ± 1.96 〖SD〗\_w √2. The precision to estimate SD\_w depends on both the number of subjects, n, and the number of observations per subject. A sample size of 31 subjects is required considering a confidence interval of 25% at either side of the estimation of SD\_w, and for m=2 observations per subject.
The SWD will be applied using a CEC M-8 shortwave thermotherapy unit (CEC Electrónica S.R.L., Argentina) that emits RF at a frequency of 27.12 MHz. The device has two rectangular capacitive applicators (18 × 12 cm), which will be placed below and above the dominant shoulder. The coplanar application will be done using the continuous wave mode. The intensity of SWD will be gradually increased until the volunteer perceives a sensation of heat, and once familiar with this perception, the intensity will be increased until a sensation of constant but tolerable pain is evoked. This sensation will be maintained throughout the SWD application, and three repetitions will be performed. Healthy volunteers will be in a lateral supine position, and a cotton towel will be used to absorb perspiration and avoid unwanted heat effects.
University of Gran Rosario
Rosario, Santa Fe Province, Argentina
Pressure pain threshold (PPT)
Change in the PPT (kPa) will be assessed bilaterally over the medial portion of the infraspinatus muscle using a digital algometer (Somedic SenseLab AB, Sweden) with a 1-cm2 round tip. Pressure will be gradually increased from 0 kPa at a rate of approximately 50 kPa/s (maximal achievable pressure: 2,000 kPa). The volunteers will be asked to press the button when they perceive that the pressure changes to pain, stopping the estimation at this point. The assessment will be repeated 3 times for each sides, alternating sides between measurements. Each measure will be performed at 30-second intervals.
Time frame: At baseline and 30 - 60 minutes after of SWD.
Pain distribution
Extension of the reported pain drawings. The results will be expressed as the percentage of the total body area.
Time frame: At 30 - 60 minutes after the application of SWD.
Modified Likert scale
A modified self-report Likert scale was used to follow the temporal progression of muscle pain/soreness after SWD, with 0 defining a complete absence of soreness and 6 indicating severe soreness.
Time frame: At 30 - 60 minutes after the application of SWD.
Myoelectrical activity (EMG)
Change in muscle activity will be assessed. Monopolar multichannel recording (6 channels) will be distributed spatially across the infraspinatus muscle, and monopolar channels will be recorded for the medial and posterior deltoid muscle. BIOAMP Biopotential amplifier will be used for recording the EMG signals, 8-channel (sample rate: 2 KHz) (UNER, Argentina) during execution of the motor tasks. EMG will be recorded before and 30 - 60 minutes after SWD application to assess redistribution of the muscle activity induced by the transient pain.
Time frame: At 10 minutes before and 30 - 60 minutes after the application of SWD.
Isometric muscle strength
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Study Type
INTERVENTIONAL
Allocation
NA
Purpose
BASIC_SCIENCE
Masking
NONE
Enrollment
31
Change in the maximal isometric strength (kgf) for external rotation in dominant shoulder will be assessed using a Hand Held Dynamometer (Lafayette Manual Muscle Testing System, Model 01165, Lafayette, IN). The measures will be taken with the volunteers in the standing position, and the arm will be placed at the side of the body with the elbow flexed at 90º, and the forearm in neutral pronosupination. The examiner will be held the dynamometer at the dorsal aspect of the distal third of the forearm. Three 6-seconds measures will be taken with rest between them and the peak and mean value will be calculated.
Time frame: At baseline and 30 - 60 minutes after the application of SWD.
Visual analog scale
A continuous visual analog scale ranging from 0 to 100, where 0 represents no perception, 30 represents pain threshold (defined as the time to reach a painful sensation at the predefined stimulation intensity) and 100 represents the tolerance threshold (defined as the sensation of pain when becomes intolerable)
Time frame: During the application of SWD.