The phase I/II, double-blind, randomized study will investigate the efficacy and safety of TACE/TAE treatment with T-ACE Oil in patients with unresectable hepatocellular carcinoma.
Subjects with HCC that meet all eligibility criteria will be admitted to hospital, and TAE or TACE treatment are performed during the hospitalization period; after embolization, subjects are observed in the ward for 1 to 7 days, and evaluated by physician before being discharged. Subjects will be followed up for 7 weeks after treatment for safety and efficacy evaluation. Phase I part: 12 evaluable subjects will be enrolled sequentially in Phase I part. The first 3 subjects will receive TAE treatment (whether or not they are contraindicated to Doxorubicin) and the following 3 subjects (4th to 6th subjects) will receive TACE treatment. The remaining subjects may receive TAE or TACE treatment. Subjects will be enrolled sequentially in Phase I. For the first six subjects in Phase I, after the subject completes TAE or TACE treatment and is followed for 2 weeks, safety and tolerability data during this period will be reviewed by the safety review committee (SRC); only approved by the SRC, the next subject may start the TAE or TACE treatment. For the 7th to 12th subjects in Phase I, after the subject completes TAE or TACE treatment and is followed until discharge from hospitalization, safety and tolerability data during this period will be reviewed by the safety review committee (SRC); only approved by the SRC, the next subject may start the TAE or TACE treatment. After data for all 12 evaluable subjects are reviewed by SRC and approval is given by the SRC, the study may proceed to Phase II part. Phase II part: 70 evaluable subjects will be randomized in a 1:1 ratio to receive TAE/TACE treatment by T-ACE Oil or Lipiodol for safety and efficacy evaluation.
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
TREATMENT
Masking
QUADRUPLE
Enrollment
2
TAE/TACE treatment was performed with T-ACE Oil. The volume of T-ACE Oil injected will be 1-1.5 mL/cm based on the diameter (cm) of the treated tumor, with room for adjustment per subject's condition or Investigator's judgement. The maximum dose of T-ACE Oil is 0.25 mL/kg/day but not over 15 mL for each treatment. The maximum dose of doxorubicin for a single TACE will be based on standard practice at each site with a maximum of 50 mg. Doxorubicin will be constituted according to labeling and site procedures at a concentration of 10 mg/mL. The emulsion to be injected will have a recommended v/v ratio of 2:1 to 2.5:1 (study product : saline with Doxorubicin dissolved within it). If more than the maximum dose of doxorubicin would be needed to form an emulsion with T-ACE Oil, the remaining volume administered will be study product only.
TAE/TACE treatment was performed with Lipiodol®. The volume of Lipiodol® injected will be 1-1.5 mL/cm based on the diameter (cm) of the treated tumor, with room for adjustment per subject's condition or Investigator's judgement. The maximum dose of T-ACE Oil is 0.25 mL/kg/day but not over 15 mL for each treatment. The maximum dose of doxorubicin for a single TACE will be based on standard practice at each site with a maximum of 50 mg. Doxorubicin will be constituted according to labeling and site procedures at a concentration of 10 mg/mL. The emulsion to be injected will have a recommended v/v ratio of 2:1 to 2.5:1 (study product : saline with Doxorubicin dissolved within it). If more than the maximum dose of doxorubicin would be needed to form an emulsion with Lipiodol®, the remaining volume administered will be study product only.
Kaohsiung Veterans General Hospital
Kaohsiung City, Taiwan
Tungs' Taichung Metroharbor Hospital
Taichung, Taiwan
National Cheng Kung University Hospital
Tainan, Taiwan
National Taiwan University Hospital
Taipei, Taiwan
Phase I part: Adverse Events as Assessed by CTCAE v5.0
All Adverse Events (AEs) occurring while on study must be documented appropriately regardless of relationship. All AEs will be followed to adequate resolution. Pre-existing conditions will be recorded as baseline on the "Medical History" of CRF. If the pre-existing condition does not change, it does not have to be reported as an AE on subsequent cycles. However, if it deteriorates at any time during the study, it will be recorded as an AE.
Time frame: Up to 12 weeks
Phase I part: Adverse Events of Special Interest (AESIs)
Pulmonary embolism and cerebral embolism will be considered adverse events of special interest (AESIs). AESIs will be analyzed as a safety endpoint.
Time frame: Up to 12 weeks after treatment
Phase I part: Incidence of all serious adverse events (SAEs) after TAE/TACE treatment with T-ACE Oil
Time frame: 7 weeks after treatment
Phase I part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg)of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg)of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg)of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Blood pressures
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.
Blood pressures (including SBP and DBP, unit: mmHg)of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg)of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg)of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase I part: Safety variables evaluation - pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase I part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase I part: Safety variables evaluation - Respiratory rate
Respiratory rate (times/min) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Respiratory rate
Respiratory rate (times/min) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Respiratory rate
Respiratory rate (times/min) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Respiratory rate
Respiratory rate (times/min) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Respiratory rate
Respiratory rate (times/min) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Respiratory rate
Respiratory rate (times/min) of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase I part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase I part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Liver function
AST and ALT (U/L) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Liver function
AST and ALT (U/L) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Liver function
AST and ALT (U/L) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Liver function
AST and ALT (U/L) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Liver function
AST and ALT (U/L) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase I part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase I part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase I part: Safety variables evaluation - Thyroid function (T3)
T3 (ng/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Thyroid function (T3)
T3 (ng/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4).
Phase I part: Safety variables evaluation - Thyroid function (Free T4)
T4 (ng/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Thyroid function (Free T4)
T4 (ng/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4).
Phase I part: Safety variables evaluation - Thyroid function (TSH)
TSH (uIU/ml) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - Thyroid function (TSH)
TSH (uIU/ml) of subjects will be measured.
Time frame: 6 weeks after treatment (V4).
Phase I part: Safety variables evaluation - ECG test
Electrocardiogram (ECG) of subjects will be measured. The participants with treatment-related adverse events will be assessed by CTCAE v5.0
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase I part: Safety variables evaluation - ECG test
Electrocardiogram (ECG) of subjects will be measured. The participants with treatment-related adverse events will be assessed by CTCAE v5.0
Time frame: immediately after the intervention (V2)
Phase I part: Safety variables evaluation - ECG test
Electrocardiogram (ECG) of subjects will be measured. The participants with treatment-related adverse events will be assessed by CTCAE v5.0
Time frame: 6 weeks after treatment (V4)
Phase II part: T-ACE Oil or Lipiodol deposition type on CT scan after TAE/TACE treatment.
CT or MRI image should be taken at the screening visit, after the TAE or TACE procedure and visit 4 (6 weeks after TAE or TACE procedure). No additional contrast will be administered for the CT after TAE or TACE procedure. V1 and V4 image evaluation will be performed by MRI. V2 image evaluation method will be performed by CT scan. If the subject has had an MRI examination within 28 days before TAE/TACE treatment, the V1 MRI can be skipped.
Time frame: 72 hours after treatment
Phase II part: mRECIST overall response at 6 weeks after TAE/TACE treatment.
mRECIST (modified Response Evaluation Criteria in Solid Tumors) overall response and mRECIST target lesion response will be evaluated based on the image taken at the screening visit and at visit 4 (6 weeks after TAE or TACE procedure). mRECIST overall response for each patient will be categorized: Complete response (CR), Partial response (PR), Stable disease (SD), and Progressive disease (PD). mRECIST overall response is based on target lesions and non-target lesions responses and appearance of new lesions and/or extra-hepatic disease.
Time frame: 6 weeks after treatment.
Phase II part: target lesion response at 6 weeks after TAE/TACE treatment.
target lesion response will be evaluated based on the image
Time frame: 6 weeks after treatment.
Phase I part: T-ACE Oil deposition type on CT scan after TAE/TACE treatment with T-ACE Oil.
CT or MRI image should be taken at the screening visit, after the TAE or TACE procedure and visit 4 (6 weeks after TAE or TACE procedure). No additional contrast will be administered for the CT after TAE or TACE procedure. V1 and V4 image evaluation will be performed by MRI. V2 image evaluation method will be performed by CT scan. If the subject has had an MRI examination within 28 days before TAE/TACE treatment, the V1 MRI can be skipped.
Time frame: 72 hours after treatment
Phase I part: mRECIST overall response at 6 weeks after TAE/TACE treatment with T-ACE Oil.
mRECIST (modified Response Evaluation Criteria in Solid Tumors) overall response and mRECIST target lesion response will be evaluated based on the image taken at the screening visit and at visit 4 (6 weeks after TAE or TACE procedure). mRECIST overall response for each patient will be categorized: Complete response (CR), Partial response (PR), Stable disease (SD), and Progressive disease (PD). mRECIST overall response is based on target lesions and non-target lesions responses and appearance of new lesions and/or extra-hepatic disease.
Time frame: 6 weeks after treatment.
Phase I part: target lesion response at 6 weeks after TAE/TACE treatment with T-ACE Oil.
target lesion response will be evaluated based on the image
Time frame: 6 weeks after treatment.
Phase II part: Incidence of all adverse events (AEs) after TAE/TACE treatment with T-ACE Oil or Lipiodol.
Time frame: 7 weeks after treatment
Phase II part: Incidence of adverse events of special interest (AESIs) after TAE/TACE treatment with T-ACE Oil or Lipiodol.
Time frame: 7 weeks after treatment
Phase II part: Incidence of all serious adverse events (SAEs) after TAE/TACE treatment with T-ACE Oil or Lipiodol.
Time frame: 7 weeks after treatment
Phase II part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Blood pressures
Blood pressures (including SBP and DBP, unit: mmHg) of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase II part: Safety variables evaluation - Pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Pulse rate
Pulse rate (beats/min) of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase II part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Body weight.
Body weight (kilograms) of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase II part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Body temperature.
Body temperature (oC) of subjects will be measured.
Time frame: 7 weeks after treatment (V5)
Phase II part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - WBC
WBC (1000/uL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Platelet count
Platelet count (1000/uL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Hb
Hb (g/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - blood urea nitrogen test
BUN (mg/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Bilirubin
Bilirubin-T and Bilirubin-D (mg/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Renal function
Creatinine (mg/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Liver function
AST and ALT (U/L) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Liver function
AST and ALT (U/L) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: discharge of hospitalization (V2A)(1 to 7 days of discharge of hospitalization)
Phase II part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: 2 weeks after treatment (V3)
Phase II part: Safety variables evaluation - Coagulation function
Prothrombin time and APTT (seconds) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Thyroid function (T3)
T3 (ng/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Thyroid function (T3)
T3 (ng/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Thyroid function (Free T4)
T4 (ng/dL) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Thyroid function (Free T4)
T4 (ng/dL) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - Thyroid function (TSH)
TSH (uIU/ml) of subjects will be measured.
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - Thyroid function (TSH)
TSH (uIU/ml) of subjects will be measured.
Time frame: 6 weeks after treatment (V4)
Phase II part: Safety variables evaluation - ECG test
each component of Electrocardiogram (ECG) of subjects will be measured. The participants with treatment-related adverse events will be assessed by CTCAE v5.0
Time frame: Pre-intervention (V1)(-28 to -1 days)
Phase II part: Safety variables evaluation - ECG test
each component of Electrocardiogram (ECG) of subjects will be measured. The participants with treatment-related adverse events will be assessed by CTCAE v5.0
Time frame: immediately after the intervention (V2)
Phase II part: Safety variables evaluation - ECG test
each component of Electrocardiogram (ECG) of subjects will be measured. The participants with treatment-related adverse events will be assessed by CTCAE v5.0
Time frame: 6 weeks after treatment (V4)