Using BCG Vaccine to Understand Tuberculosis Infection

Overview

Tuberculosis (TB) is a disease that usually causes an infection in the lungs. The only vaccine to prevent TB is called BCG (Bacillus Calmette-Guérin). BCG contains a live germ similar to Mycobacterium tuberculosis, the germ that causes TB. BCG does not work very well, and TB remains the most common cause of death by infection worldwide. Human challenge models involve exposing healthy volunteers to an infectious disease in a safe and controlled way. This helps researchers understand more about an infectious disease and the body's response and can help develop new vaccines and treatments. The purpose of this study is to set up a human challenge model using BCG to understand how the body responds to this. If our human challenge model works well it may be used to help researchers develop new vaccines and tablets to treat TB in the future. This study will recruit healthy volunteers, of all genders, age 18-50 years. The first part of the study (phase A) will recruit 10 participants. Participants in phase A will receive intradermal injection with BCG into the upper arm at three times the usual dose. On day 14 after BCG the following skin samples will be taken from the BCG site with the use of local anaesthetic: skin swab, microbiopsy, skin scrape and punch biopsy. Participants in this phase of the study will also have blood tests to ensure they are safe to take part and to monitor the immune response to BCG. The overall aim of this part of the study will be to ensure BCG can be isolated (grown in culture and by molecular techniques) from participants' BCG site 14 days after the injection. The investigators aim to test whether BCG can be isolated by punch biopsy and minimally invasive techniques (microbiopsy, skin scrape and skin swab). If the investigators find that they can isolate BCG successfully using the minimally invasive methods of skin sampling and the participants have not experienced any serious adverse events, they can proceed to phase B of the study. In phase B 20 participants will be recruited. These participants will receive BCG as described for phase A. They will then have serial skin samples taken using either microbiopsy, skin scrape or skin swab on days 0, 2, 7, 14 and 28. The focus of this phase of the study is to assess immune responses to intradermal injection at the local (skin), systemic (blood) and respiratory mucosal (nose) compartments. This will involve longitudinal sampling from blood, nose and skin to measure BCG growth and the immune response over time.

Background In 2020 an estimated 10 million people fell ill with tuberculosis (TB) and 1.5 million people died making TB the second leading infectious killer after COVID-19. Multi-drug resistant tuberculosis is a public health crisis and increasing health security threat. Despite this, the only currently available vaccine for prevention of tuberculosis is the 100-year-old Bacille Calmette-Guerin (BCG), which prevents disseminated forms of tuberculosis but has limited efficacy against pulmonary tuberculosis. Phase 3 vaccine trials for tuberculosis are large, costly and conducted over prolonged periods. Controlled human infection models involve inoculating healthy participants with an infectious agent and can be used to accelerate vaccine development as well as improve understanding of disease pathogenesis and the host immune response and the development of new therapeutic combinations. There are current concerns in using wild type Mycobacterium tuberculosis as a human challenge agent given that infection cannot be reliably eradicated. The McShane group in Oxford have established a human challenge model using intradermal BCG and have published several peer reviewed articles. The Liverpool School of Tropical Medicine propose to replicate and further refine this model and I will be undertaking this project as part of an MD. The investigators aim to perform serial skin sampling paired with respiratory mucosal and systemic sampling to investigate and compare the immune response between these compartments. Ultimately this model may be used to select the most promising candidates for clinical trials. Study hypothesis 1. BCG SSI strain will be recovered by tissue biopsy 14 days after intradermal injection by both classical microbiological and molecular diagnostic techniques. 2. Quantified BCG recovery (molecular techniques) by minimally invasive skin biopsy will be at least 90% as good as gold standard punch biopsy and will offer a more acceptable method for participants in the future. Overall study design This is a single-centre study divided into two parts. The first part of the study (phase A) will recruit 10 participants. The participants in phase A will receive intradermal injection of BCG SSI vaccine into the upper arm on day 0 at three times the usual dose (BCG SSI 6-24 x 105 colony forming units). On day 14 after BCG injection. the following skin samples will be taken from the BCG injection site with the use of local anaesthetic: skin swab, microbiopsy, skin scrape and punch biopsy. The overall aim of this part of the study will be to ensure BCG can be isolated from participants BCG intradermal injection site 14 days after the injection. The investigators aim to test whether BCG can be isolated in comparable amounts by punch biopsy and minimally invasive techniques (microbiopsy, skin scrape and skin swab). They will proceed to phase B of the study if they are able to isolate BCG by culture or PCR using one of the minimally invasive techniques and no serious adverse events have occurred. In the second phase of the study (phase B) 20 participants will be recruited. These participants will receive the BCG vaccine as described for phase A. The minimally invasive technique with the best BCG recovery will be used to perform longitudinal skin sampling to monitor BCG growth and the local skin immune response. Parallel samples will be taken from the respiratory mucosa and blood to compare the immune response in these compartments. Study procedures Consent: In both phases of the study the consent and screening process will be the same. Potential participants will be invited to discuss the study at a 60 minute appointment, where they will watch a presentation on the study and complete a consent quiz to demonstrate understanding of the study and capacity to consent. Screening: To assess eligibility for the study, a focused medical history will be taken. If deemed necessary by the research team, GP questionnaires will be sent to GPs of participants if their vaccination history or medical history is unclear. A clinical examination will be performed including cardiorespiratory examination. Vital signs will be taken, as well as a nose and throat swab for COVID-19 lateral flow test (if required by UKHSA) and storage, urine pregnancy test (females only). The following blood tests will be taken: HIV test, hepatitis serology, full blood count and clotting, stored serum, blood PBMCs. BCG intradermal injection (day 0): For both parts of the study, at the BCG injection visit, participants will receive a single injection of the BCG vaccine at three times the usual dose intradermally into the upper arm. A CE marked intradermal delivery device (NanoPass MicronJet, NanoPass Technologies Ltd) will be used, which is licensed for the intradermal delivery of liquid drugs including vaccines for standardised intradermal delivery. After this visit participants will complete an electronic diary for 14 days to report any adverse events. Throughout the study, participants will have access to a 24/7 on-call telephone service. Follow-up phase A: In phase A, participants will attend follow-up appointments on days 2, 7, 14, 21 and 28 after BCG. A skin swab will be taken from the BCG injection site and a photograph of the site at each follow-up visit. The following blood tests will be taken: serum and PBMC for immunology ate each follow up visit and blood RNA on day 2. In addition participants will attend on day 14 for skin biopsies. Local anaesthetic will be injected around the BCG vaccination site and the following skin samples will be taken in this order: * Microbiopsy - This instrument uses a hollow needle to take a skin sample of 0.21mm diameter, 0.4mm depth. * Skin scrape - This will take a sample from the skin surface using a Rhino-probe. * Punch biopsy - This will take a skin sample from the middle of the BCG site using a 4mm punch biopsy instrument. Follow-up Phase B: In phase B participants will attend for follow-up visits on days 2, 7, 14, 21 and 28 after the BCG injection as with phase A. In addition, in phase B the following respiratory mucosal samples will be taken from the nose on days 0, 2, 7, 14, 21 and 28 in phase B: * Nasal wash will be performed in a subset of participants only- the nose is irrigated with normal saline and the liquid that is produced is collected and analysed * Nasosorption - participants will have small pieces of filter paper inserted into nostrils for maximum of 2 minutes * Nasal scrape - small superficial scrapes are taken from inside the nose to collect nasal cells * The following skin samples will be taken from the BCG vaccination site: Microbiopsy OR skin scrape (depending on results of phase A) AND Skin swab on days 0, 2, 7, 14, 21 and 28 Laboratory mycobacteriological analysis * Skin biopsy specimens will be cryopreserved and subsequently processed in batch * Skin samples will be thawed and homogenised then cultured on Middlebrook 7H11 agar for 4 weeks before counting. * The remaining biopsy specimen homogenate will be stored at -80° for subsequent DNA extraction * The remaining homegenate will be thawed and DNA will be extracted and quantitative PCR will be performed Laboratory immunological analysis Antibody responses: Samples of serum and nasosorption will be retained for antibody measurement using standard ELISA assays. Cellular responses: Ex Vivo Interferon γ (IFN-γ) Enzyme-Linked Immunospot (ELISpot) assays will be performed on freshly isolated PBMCs from all participants. Responses to purified protein derivative (PPD) from M. tuberculosis will also be assessed. Unstimulated PBMCs will be used as a measure of background IFN-γ production. Results will be reported as spot-forming cells per million PBMCs, calculated by subtracting the mean count of the unstimulated PBMCs from the mean count of triplicate antigen wells and correcting for number of PBMCs in the well. RNA analysis: Samples will be retained for transcriptomic signature feasibility testing. These methods will be essential as the CHIM develops for vaccine testing. Reporting procedures for serious adverse events (SAEs) and suspected unexpected serious adverse reactions (SUSARs): Adverse events will be actively and passively solicited. A symptom diary will be completed for the first 14 days to identify any adverse events and adverse events will be solicited at follow-up visits and recorded in the participant eCRF. Any serious adverse event considered by the CI to be related to the challenge agent and unexpected will be reported to the REC. As the challenge agents are vaccines with Marketing Authorisation, the mechanism for reporting any SAEs to the MHRA is via yellow card. Data and Safety Monitoring Committee (DSMC) The specific role of the committee will be: * To independently review SAEs and AESIs regardless of relatedness to any of the study procedures throughout the study. * To formally review the safety profile and quantified BCG recovery rate * To perform unscheduled reviews on request of the study team at a demand and frequency determined by the severity of reported adverse events. The DSMC will be supplied with a safety report at the end of the study, in the event of an SAE, or if requested at any time by the CI or DSMC members. The Chair of the DSMC will also be contacted for advice where the CI feels independent advice or review is required.