The goal of this clinical trial is to test the MEX-CD1 hemodialysis medical device in patients suffering from Wilson's Disease. The main questions it aims to answer are: * Does the device work as expected by removing the excess of free copper from the blood? * Is the device safe when used according to the instructions for use? Depending on the severity of their symptoms, patients will receive either 5 or 10 treatments on consecutive days with the MEX-CD1 hemodialysis medical device.
This study investigates the performance and safety of the MEX-CD1 hemodialysis device in patients suffering from Wilson's Disease. Wilson's Disease is a rare genetic disease (1'000 to 2'000 patients in France) linked to a problem in copper homeostasis. The direct consequence is a progressive accumulation of copper, first in the liver and then in the whole body with two major implications: (i) at the hepatic level and (ii) at the neurological level. The disease is globally well known and managed in developed countries. It can present itself in several manners: An acute decompensation of the disease is possible. This concerns mainly big children or young adults, presenting themselves with an acute hepatic deficiency that may need intensive care and a liver transplant. In most cases, the clinical picture is one of chronic hepatic and/or neurological disease. Treatment must be adapted to the clinical situation. Two phases can be distinguished: * A primary treatment phase, whose goal it is to eliminate the excess copper deposited in the body. This phase generally takes 1 to 2 years with chelating treatments; * A maintenance phase, corresponding to the treatment which will allow the copper balance to be maintained and equilibrated. This lifelong treatment is to be taken daily (with doses of chelators and/or zinc salts). Finally, during the maintenance phase, periods of lesser observance or escape phases can be observed, those are responsible for severe aggravation of the liver (fulminant hepatitis) or of neurological symptoms that can lead to death. The proposed medical device allows, by combining dialysis to a hyper-chelating colloidal dialysate (MEX-CD1) to specifically extract copper from the blood (and particularly the exchangeable copper). All patients enrolled in this study will, depending on the severity of their symptoms, receive 4-hour long treatments with MEX-CD1: * Patients with moderate liver injury not requiring extracorporeal blood epuration therapies as standard of care: 5 treatments with MEX-CD1 on consecutive days * Patients requiring extracorporeal blood epuration therapies as standard of care: 10 treatments with MEX-CD1 on consecutive days During the MEX-CD1 treatment, the patient's condition will be closely monitored. Additionally, enrolled patients will have a thorough assessment of their Wilson's Disease at the screening visit and at the last visit. Between the last day of treatment and the last visit, enrolled patients will have two rest days.
Study Type
INTERVENTIONAL
Allocation
NA
Purpose
TREATMENT
Masking
NONE
Enrollment
1
MEX-CD1 is a hyper-chelating colloidal solution that can be added to the dialysate to be used in low-volume continuous veno-venous hemodialysis. One treatment will last 4 hours. For non-hospitalized patients, the treatment is performed on an outpatient basis.
Hôpital Femme Mère Enfant, Service des urgences et la réanimation pédiatriques
Bron, Auvergne-Rhône-Alpes, France
Hôpital Croix Rousse, Service d'hépatologie et gastroentérologie
Lyon, Auvergne-Rhône-Alpes, France
Hospital Universitario Vall d'Hebron, Unitat de Trasplantament Hepàtic Pediàtric
Barcelona, Catalonia, Spain
Hospital Clinic Barcelona, Liver ICU
Barcelona, Catalonia, Spain
Performance of MEX-CD1
The primary objective is to determine the performance of MEX-CD1 in terms of copper extraction in low-volume continuous veno-venous hemodialysis. This will be measured by the mean net amount of copper extracted per unit time relative to baseline, i.e., a proportion.
Time frame: 4 hours; from treatment start (0 hours) to treatment end (4 hours)
Pulse measurement for safety purposes
Assessment of the safety of the MEX-CD1 medical device in low-volume continuous veno-venous hemodialysis. Safety end point measurements are evaluated throughout the study.
Time frame: From the start of the first MEX-CD1 treatment until the last visit, assessed up to 2 weeks.
Temperature measurement for safety purposes
Assessment of the safety of the MEX-CD1 medical device in low-volume continuous veno-venous hemodialysis. Safety end point measurements are evaluated throughout the study.
Time frame: From the start of the first MEX-CD1 treatment until the last visit, assessed up to 2 weeks.
Arterial blood pressure measurement every hour during treatment phase for safety purposes
Assessment of the safety of the MEX-CD1 medical device in low-volume continuous veno-venous hemodialysis. Safety end point measurements are evaluated throughout the study.
Time frame: Once at screening and last visit and every hour during treatment phase, assessed up to 2 weeks.
Weight measurement for Safety purposes
Assessment of the safety of the MEX-CD1 medical device in low-volume continuous veno-venous hemodialysis. Safety end point measurements are evaluated throughout the study. Weight measurement before and after each treatment.
Time frame: From the start of the first MEX-CD1 treatment until the last visit, assessed up to 2 weeks.
AE recording
Assessment of the safety of the MEX-CD1 medical device in low-volume continuous veno-venous hemodialysis. Safety end point measurements are evaluated throughout the study.
Time frame: From the start of the first MEX-CD1 treatment until the last visit, assessed up to 2 weeks.
Number of participants with abnormal laboratory test results
Safety measurements via blood sample analysis before and after each 4-hour dialysis session
Time frame: From the start of the first MEX-CD1 treatment until the last visit, assessed up to 2 weeks.
Responder rate
The responder rate is defined as the proportion of patients with \>50% of the baseline net amount of exchangeable copper extracted throughout the study.
Time frame: 4 hours; from treatment start (0 hours) to treatment end (4 hours)
Copper kinetics
Kinetics of Copper measurement at time 0h, time 1h, time 2h, time 3h and time 4h
Time frame: 4 hours; from treatment start (0 hours) to treatment end (4 hours)
Changes in copper concentration between screening visit and last visit
Assessment of the change in non-ceruloplasmin-bound copper (NCC) concentration between the baseline and the patient release
Time frame: Between the screening visit and the last visit, assessed up to 2 weeks.
Hepatic function evolution
Assessment of the stability or improvement of hepatic function between the enrolment and the last visit of the patient according to the history of the disease. Hepatic function is assessed through medical imaging, transient elastography (FibroScan or FibroTest), LiverMultiScan™, assessment of presence/absence of jaundice, assessment of presence/absence of haemolysis, ascites detection per sonography.
Time frame: Between the screening visit and the last visit, assessed up to 2 weeks.
Neurologic and psychiatric status evolution
Assessment of the stability or improvement of the neurological and psychiatric status between the enrolment and the last visit of the patient. Neurological and psychiatric status is evaluated with UWDRS scores, Clinical Global Impression-Improvement Scale (CGI-S versus CGI-I), MRI. (no units for all the scales)
Time frame: Between the screening visit and the last visit, assessed up to 2 weeks.
Wilson's Disease evolution
Assessment of the stability or improvement of the WD by Global Assessment Scale for WD between the enrolment and the last visit of the patient.
Time frame: Between the screening visit and the last visit, assessed up to 2 weeks.
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.