Injectable Resin Composite Versus Dual-cured Resin Cement for Cementation of Indirect Onlay Restorations

Overview

Marginal integrity is considered the main essential part of indirect restorations and any discrepancy after cementation and poor marginal fit can lead to microleakage, marginal discoloration, dissolution of cement and secondary caries. The type of cement used plays an important role and can govern the amount of augmentation in discrepancy after cementation. Although resin cement is still the gold standard luting agent for the cementation of all indirect restoration, it lacks some properties that may be available in the restorative resin composite such as higher filler loading, higher mechanical properties and wear resistance. may have been the first to propose the use of restorative, flowable resin composite as a luting agent for ceramic inlays. These authors demonstrated that with respect to polymerization rate, there were no advantages of dual curing-resin compared to light curing only. In addition, the overall handling of the light-curing flowable restorative resin composite was judged to be easier than that of the dual cured material. The same conclusions were drawn by Kramer and franken Berger who added that less luting resin composite overhangs were found with the light polymerized composite-resin because the clinician has more time for excess removal prior to polymerization. The claimed further potential advantages of using restorative rein composite as a luting agent is their resistance to wear which proved to be superior to resin cements

the author presented a review on the updates of dental cements, focusing on the composition, properties, advantages, limitations, and indications of the various cements available. Nowadays, dental restorations are made from various biomaterials, and depending on each clinical case, an appropriate luting material will be selected. There is no luting material that can be universally used. Therefore, it is important to distinguish the physical, mechanical, and biological properties of luting materials in order to identify the best options for each case. Nowadays, the most commonly used dental cements are glass-ionomer and resin cement. The type, shade, thickness of resin cement and the shade of the ceramic, all together, have a tangible influence on the final restoration color. Surface treatments of the restoration increase the micro tensile bond strength. Hence, the proper surface treatment protocol of both the substrate and restoration surfaces is needed before cementation. Additionally, the manufacturer's instructions for the thin cement-layer thickness are important for the long-term success of the restoration. the author conducted a study to evaluate the performance of two different adhesive resin cement systems in the cementation of inlay/onlay restorations produced from resin nanoceramic blocks using the CAD/CAM system. The methodology was total of 70 inlay/onlay restorations made from Cerasmart (GC, Tokyo, Japan) resin nanoceramic blocks using CEREC Omnicam (Sirona Dental, Bensheim, Germany) were placed in 53 patients. The restorations were cemented with RelyX U200 Automix (3M ESPE, Seefeld, Germany) self-adhesive resin cement (RXU) after selective enamel etching or with G-CEM LinkForce (GC, Tokyo, Japan) adhesive resin cement (GCL) in combination with a universal adhesive (G-Premio Bond) in selective etch mode. At baseline and after 6, 12, and 18 months, restorations were examined by two calibrated clinicians according to modified USPHS criteria. . he concluded that the two resin cement systems showed acceptable clinical performance for the cementation of resin nanoceramic CEREC Omnicam inlay the author conducted a study to evaluate the retention strength of zirconia crowns luted with two types of resin cement under environmental pressure changes.Thirty zirconia crowns were fabricated by using computer-aided design/computer-aided manufacturing (CAD/CAM) system and were cemented by Panavia F2.0 (PAN), hand-mixed RelyX Unicem (UNH), or auto-mix RelyX Unicem Aplicap (UNA) cements on the corresponding extracted human molars. The samples were randomly divided into three groups according to the cement type. After 3000 thermal cycles, the cemented crowns were subjected to 24 pressure cycles (0 to 5 atmospheres). The retention force (N) of the specimens was measured in a universal testing machine. To normalize the retentive force, the recorded force was divided by the surface area of each tooth for measuring the retentive strength (MPa). he concluded that. The adhesive failure mode was predominant in all the groups.