This study is designed in accordance with the European Medicines Agency (EMA) regulatory guidelines, with the aim of characterizing the bioavailability of febuxostat in the two formulations in healthy adult subjects. Within the clinical portion of the study each subject will receive a single oral dose of the test and the reference formulation in compliance with the generated randomization code. The primary study endpoints are the pharmacokinetic (PK) parameters Cmax and AUC0-T of febuxostat.
This is a single center, randomized, 2-treatment, 2-period, 2-sequence, crossover, single dose study design, in which 50 healthy adult subjects will receive one of the study treatments during each study period. The objective of this study is to determine the bioequivalence of two different formulations of febuxostat after a single oral dose administration under fasting conditions. The intra-subject variation following a single dose of febuxostat appears to be up to 34% for Cmax and up to 12% for AUC0-T. Statistically, given that the expected Test to Reference ratio of geometric LSmeans should fall within 95 and 105%, it is estimated that the lowest number of subjects to meet the 80 to 125% bioequivalence range with a statistical a priori power of at least 80% is about 46. Therefore, the inclusion of 50 subjects should be sufficient to account for the possibility of drop-outs, variations around the estimated intra-subject CV and to conclude in favor of the hypothesis of bioequivalence with sufficient statistical power. Subject eligibility for this study will be determined at the screening visit and eligible subjects will be admitted to the clinical research unit at least 10 hours prior to drug administration for each study period. A subject who withdraws or is withdrawn during the pretrial evaluations but before receiving the investigational product (IP) will not be considered as a drop-out and will not be included in the final database. Standbys should be recruited and available to replace any subject who withdraws prior to the first drug administration. On-study drop-outs will not be replaced. Altasciences will generate the randomization code with a computer program according to the study design, the number of subjects and the sequence of treatment administration. The random allocation of each sequence of treatment administration to each subject will be done in such a way that the study is balanced. Once generated, the randomization code will be final and will not be modified. Eligible subjects will be randomized to one of two treatment sequences. There will be two sequences in the study: AB and BA, where A = the test product, B = the reference product (see detailed description of A and B items in Section "Arms and Interventions"). For each study period, subjects will receive a single 120 mg oral dose of febuxostat (the test or the reference formulation), with approximately 240 mL of water at ambient temperature, following a 10-hour overnight fast. The tablet must be swallowed whole and must not be chewed or broken. Study participants will be aware they will receive different formulations of the same drug, without being informed which product (Test or Reference) is being administered. The date and time of each dose will be recorded. For each subject, all scheduled postdose activities and assessments will be performed relative to the time of study drug administration. Fasting will continue for at least 4 hours following drug administration, after which a standardized lunch will be served. A supper and a light snack will be served at appropriate times thereafter, but not before 9 hours after dosing. Water will be provided as needed until 1 hour predose. Water will be allowed beginning 1 hour after the administration of the drug. In each study period, 21 blood samples will be collected for PK assessments. The first blood sample will be collected prior to drug administration while the others will be collected up to 36 hours after drug administration. Febuxostat plasma concentrations will be measured by a validated bioanalytical method. Subjects are to be discharged from the clinic after the 36-hour postdose PK sample collection, and following medical approval. However, they may be advised to stay at the clinical site for safety reasons, if judged necessary by the physician in charge. The expected terminal elimination half-life observed after a single oral 120 mg dose of febuxostat film-coated tablets under fasting conditions is 5.1 hours. To avoid any carry-over effect, a wash-out of 7 calendar days is planned between drug administrations. The decision of which subjects will be included in the PK analysis is to be documented by the pharmacokineticist (or delegate) and approved by the sponsor before the start of the sample analysis by the bioanalytical facility. Subjects who are expected to provide evaluable PK data for both the Test and Reference products (based on viable PK samples) will be included in the pharmacokinetic analysis. Concentration data of the remaining subjects will be presented separately. Subjects who do not complete the sampling schedule of one or more study periods may be included in the PK and statistical analysis and bioequivalence determination for only the PK parameters that are judged not to be affected by the missing sample(s). Statistical analysis of Tmax will be based on a non-parametric approach. Statistical analysis of all other pharmacokinetic parameters will be based on an analysis of variance (ANOVA) model. Two-sided 90% confidence interval of the ratio of geometric least-squares means (LSmeans) obtained from the ln-transformed pharmacokinetic parameters will be calculated. Statistical inference of febuxostat will be based on a bioequivalence approach using the following standards: the ratio of geometric LSmeans with corresponding 90% confidence interval calculated from the exponential of the difference between the Test and the Reference for the ln-transformed parameters Cmax and AUC0-T should all be within the 80.00 to 125.00% bioequivalence range. The safety population will include all subjects who received at least one dose of one of the IPs. Safety assessments will include clinical laboratory tests, and adverse event (AE) monitoring. Additional safety measurements may be performed at the discretion of the investigator for reasons related to subject safety. The physician in charge will be present at the clinical site for at least the first 4 hours following each drug administration and will remain available at all times throughout the study. Total study duration: up to 35 days (including screening).
Study Type
INTERVENTIONAL
Allocation
RANDOMIZED
Purpose
OTHER
Masking
SINGLE
Enrollment
50
Febuxostat is manufactured by Pharmtechnology LLC, Republic of Belarus. Each film-coated tablet contains 120 mg of febuxostat.
Adenuric is manufactured by Menarini - Von Heyden GmbH, Germany (MAH: Menarini International Operations Luxembourg S.A., Luxembourg). Each film-coated tablet contains 120 mg of febuxostat.
Altasciences Company Inc.
Montreal, Quebec, Canada
Cmax of febuxostat in plasma after administration of the test and the reference products
Maximum observed concentration in plasma
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
AUC0-T of febuxostat in plasma after administration of the test and the reference products
Cumulative area under the concentration time curve calculated from 0 to time of last observed quantifiable concentration (TLQC) using the linear trapezoidal method
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
Tmax of febuxostat in plasma after administration of the test and the reference products
Time of maximum observed concentration; if it occurs at more than one time point, Tmax is defined as the first time point with this value
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
TLQC of febuxostat in plasma after administration of the test and the reference products
Time of last observed quantifiable concentration
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
AUC0-∞ of febuxostat in plasma after administration of the test and the reference products
Area under the concentration time curve extrapolated to infinity, calculated as AUC0-T + ĈLQC (the predicted concentration at time TLQC) / λZ (apparent elimination rate constant)
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
Residual area of febuxostat in plasma after administration of the test and the reference products
Extrapolated area (i.e. percentage of AUC0-∞ due to extrapolation from TLQC to infinity)
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
Time point where the log-linear elimination phase begins (TLIN) of febuxostat in plasma after administration of the test and the reference products
Time point where the log-linear elimination phase begins
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
λZ of febuxostat in plasma after administration of the test and the reference products
Apparent elimination rate constant, estimated by linear regression of the terminal linear portion of the log concentration versus time curve
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
Terminal elimination half-life (Thalf) of febuxostat in plasma after administration of the test and the reference products
Terminal elimination half-life, calculated as ln(2)/λZ
Time frame: Time points 0.00 (prior to each drug administration) and 0.25, 0.50, 0.67, 0.83, 1.00, 1.25, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 6.00, 8.00, 10.00, 12.00, 15.00, 18.00, 24.00, 36.00 hours after each drug administration
Number of treatment-emergent adverse events for the test and the reference products
The safety population will include all subjects who received at least one dose of the test or the reference product. Any significant changes will be recorded as treatment-emergent adverse events only if they are judged clinically significant by the qualified investigator or delegate.
Time frame: Up to 9 days (after the first drug administration until the completion of clinical part of the study)]
This platform is for informational purposes only and does not constitute medical advice. Always consult a qualified healthcare professional.